Search results

The other day, I bought a lot of nubus cards cheaply at yahoo auction in Japan.   Among them was a very large card, the Avid Python II 2 Advanced JPEG Board Video Card.   Fortunately I got two of them together.  They are cabled to each other.  I know you need avid video editing software, but...

I also challenge Amiga 4000 Restore using the same CPU. I think it's going to be a good time at the end of the year.

Thank you all for the information! I will search for google information and review the clockup kit. The latest contact information is also very helpful. It's an interesting information that the Quadra 700 clockup limit is 33Mhz. I have two Q 700. One is trying to put a PPC card and try how...

Thank you! I watch ebay.

Hello! At present, I am modified Quadra700 of CPU from 25MHz to 33, 35, 37.5, and 40Mhz The 66MHz frequency has been obtained, but 70, 75, 80Mhz is hard to obtain. I asked the Japanese specialty store, but it costs about 120 dollars for each type of 5 types of special order. Digikey, mouser...

Thank you very much !

Hello. It's Friday, December 2020. I was in the middle of working remotely, but I got bored staying at home, so I went for a walk in Akihabara, an electric town in Tokyo. (Being able to go for a walk whenever I want is what I found most beneficial after the world changed a year ago.) There...

>>ktkm Thank you. I'm looking forward to your Quadra to power up. If there's anything you don't know, ask me a question. I also use twitter. Follow me if you like. Have a nice weekend! @shinjyukukabuki1

trancend photo. mansa is for drive recorder.

The long-term test seems to be done now.

>>sutekh I did test ,,↓

To ktkm Because the maximum transmission rate of V5 is 2.3MB/s. In this case, there is no change in the Jackhammer or internal SCSI. If you want to get faster, you have to buy SCSI2SD of V6. I also bought a new V6 because the first SCSI2SD version .Perhaps in V5, even if it's good, it's only...

Hello everyone.  The other day (12/2020), I benchmarked various manufacturers' SD memory cards on my Quadra700 (PPC50Mhz) and FWB JackHammerSCSI with SD2SCSI Version 6:2020. I would like to share the results here.  I hope this will be helpful for those who are planning to buy SD2SCSI.  (This...

Correction. There are cases where it doesn't work even if you exchange everything. In this case, we need to doubt the failure of power units.

The capacitor is rust around. You need to remove all capacitors and remove parts of brown and clean up the parts with your toothbrush. When you're clean, you need to order a new parts in digikey and get it. But even if you exchange everything, it doesn't work.

This is a picture of the capacitor after replacement.

----------------------------------------------- Sorry. I'm using Japanese. You need the help of google or DeepL to read English. I can't get information on older Macs in Japan. ----------------------------------------------- Right now, I am working on repairing the power supply unit of my...