Search results

This is the same as the 6500CD as well.  Thank you for the parts list. I was looking for them and decided to google search and found this thread.  Here is a link to my imgur pics. https://imgur.com/a/7Idp5rh

So my IIci just came off my bench after I re-capped the board.  Currently installing OS to SCSI2SD 5.1 if for no other reason than I want to keep the physical hard drive unused.  The fan on the power supply is noisy/whiny.  Not horrible but enough to be annoying.  So I wanted to swap out the...

As it turns out the Plus, as I suspected, does not like fast memory.  I found 4x 100ns 1MB modules in my OTHER SE and swapped them.  Both computers now report 4MB of memory.  The Plus with 100ns and the SE with 70ns.

Howdy there folks! Running into a bit of a problem that I can't work out myself and was hoping you could help. I had a bad Plus motherboard so I bought another one on ebay.  It came missing both resistors R8 and R9. But since I wanted to install 4MB that was fine! Well it will not boot up...

I did the same thing you did Joe, I just bought a new board. Got a Rom3 with a Woz edition top cover.  Now I can take my time and find a $15.00 board on ebay like you did and get the broke one up to 100% again and re-sell it to recoup some of my costs.  Thanks for all your hard work and help. ...

Well I mean it is kinda good news and kinda bad news I guess. I still need the chip but since it is socketed and I have the puller I should be able to remove it and replace it with another.  But the bad news is that I can't find one.   I need a damaged or non-functional iigs board to pull one...

Socketed.  I have AMI 344S0046-2 So the video controller has control of 3.5 ports?  What about smart port because that isn't working either.  Someone said on facebook that the smartport uses 5.25 part of things so if the 5.25 is working then the smartport should work.  Can anyone confirm this?

I just read that thread  thank you for posting it.  Yep, that is exactly what I have going on but I don't know what the VGC looks like. I'll try and figure it out.  In the mean time, if someone has a iigs board that works they want to sell me cheap, get in touch? ;)

Messing around where I shouldn't have I was making my own cable for a Duo drive that I found at a garage sale without cable.  Easy enough to make a cable but I could have made a mistake?  Anyways let me tell you how this all went down and maybe you can tell me that my IIgs can be saved. So I've...

Hi there.  Clicking coming from the speaker. youtube links at bottom... With the floppy plugged in it makes noise in time with speaker click. I unplugged the floppy and rebooted. Now I don't hear the floppy making noise but the speaker still clicks. Nothing appears on the screen.  No...

Thank you. I also PM'd you on facebook because a few files you referenced no longer exist.

Probably because they haven't looked at one and made a list yet.  If you take your phone and take really close up photos of every capacitor with its board assignment number  such as C1, C2 etc and then one photo of the top and bottom of the entire board and send it to them, they will make a...

Main PC is Windows 10 64 Computer to operate Macintosh SE 4MB and SCSI2SD 5.1 with 2GB SD card What I have installed currently: Basilisk II, HFVExplorer, rufus 3.8, scsi2sd-util, uud32.exe, ciderpress403, ddrelease64. What I am trying to do: I want to partition the 4GB SD card into two...

Console5 now has them in stock. You can buy an analog board cap kit.

Thank you Dog Cow.  I see what you are driving at.  However the system is currently in pieces on my bench while I await the arrival of the analog cap kit.  Yes, I could put it back together without doing any capacitor replacements and do your test and I might do that this weekend. Thank you.

Not just this disk.  Anything on floppy emu or the physical floppy drive.  It just says "welcome to macintosh and then it starts flickering as in the video link.  Never proceeds further.  Well I can't say never, but I walked away for several minutes to change over laundry and when I cam back it...

Any electric motor, if seized internally, can be taken apart and cleaned and returned to use.  If it is something on the little boards that burned up or something, i'd say it isn't worth going forward.  If you know your gears are all ok you might be able to sell the mechanism on ebay and then...

Excellent thank you!  Follow up question.  If I get the 5.1 can I also use it with the scsi to db25 converter that is sold for $14.00? https://store.inertialcomputing.com/product-p/idc50f-db25f.htm I don't necessarily want the 5.5 with it soldered on because I may end up mounting it inside the...

I have two normal SE's, a 512k and a Plus. I also have a floppy emulator. One of my SE's has a great 40MB hard drive that I took out of a broken LC and it is rocking it now. The other SE has a dead hard drive and I am tempted to also build a external hard drive using a SCSI2CD board.  But it...

Anyone have a source on a replacement for the L2 adjuster on the analog boards?  Mine is completely hollow inside.  I think previous owner must have put a metal screwdriver inside. Width isn't bad as it is but needs a bit of a tweak.  I know I can manipulate it manually but would be better if I...