Recent content by wileyc

bbraun's vertical feet (with OpenSCAD source, much superior to a random STL): https://web.archive.org/web/20200507223308/www.synack.net/~bbraun/mac3d/ For what it's worth, my horizonal feel (also with OpenSCAD source): https://www.thingiverse.com/thing:3934858

Update: use a 680µF/400V capacitor to replace the 620.  The 560 doesn't smooth the line voltage out enough -- the screen will wobble after things warm up a bit.  (the old capacitor actually measured at around 670 FWIW) Mouser part number 5985-381-400V680 works fine.  The original is spade...

I got ahold of a non-functional SE/30 about a month ago, and decided that repairing it would be my isolation project. It's operational now.  Apart from the usual cracked solder joints on the analog board, and leaking caps on the logic board (both of which I took care of before I even thought of...

I went ahead and made my Radius ROM images available at https://www.disavowed.jp/quadra/ I'll add more things as I come across them, in the hope that they'll be useful for others.

A long time ago, in another lifetime, I did prepress at a small regional newspaper.  We used Quadra 950s with Radius cards, mostly 24X (except for the station that did the classifieds, which used a Radius mono two-page display). So when I lucked into a 950 awhile back, I scrounged for a 24X...

Hello, We have two Radius PrecisionColor 8•24X cards (one in my 950, one in her 700 -- thanks, Jim!).  Mine came with ROM revision 1.2.1 (295-0005-04-A), and hers with 1.02 (295-0005-02-A). To keep things consistent, I burned a 27c256 with 1.2.1 and put it into her card.  It's working well...