A 060 accelerator for the Mac could be awesome, on my Amiga 1200 using my 68060@100 mhz accelerator, the fusion emulator beats the early PowerPC Macs with no problem using the speed test.
Hi got the program resource miner, loaded the included 7.6.1 patch then select the system suitcase but when apply got several conflicts like the one in the picture.
If I choose to "apply to all further conflicts" and "overwrite" the result is a nonworking system folder that stuck on the happy...
Recently got tired of using the MAC-VGA adapter on my PowerMac 9600 my voodoo 1 already added a lot of cable clutter, so purchased one of the non-OEM twin turbo cards that have the VGA output on it.
Then when I placed it next to my OEM apple card (the one that is included factory on the 9600)...
Hi, in the past got good success flashing a 3dfx voodoo 3 using the mac firmware, and worked great, but lately started to show artifacts from bad ram.
So also I got a pc 3dfx voodoo banshee 16megs AGP, and was thinking if is possible to flash it for mac.
Searched for flashing a banshee to mac...
Look some of your VRAM Simms are bad, i have exactly this issue a few days ago. The screen looked very similar to your capture.
Are you interleaving the Simms correctly ?, also you tried only adding 2 Simms and swapping them to check for a bad one ?.
Hi guys,
From this thread:
https://68kmla.org/bb/index.php?threads/1920x1080-on-pm8500-built-in-twi...
Does someone have a copy of these files ?.
http://blargg.8bitalley.com/parodius/mac/CustomGraphicsDriver.sit
http://blargg.8bitalley.com/parodius/mac/Custom_TwinTurbo9600_Driver.sit
They...
In my case the first thing i have done is do a deep clean of the board hot water and brush cleaned using ipa also closely to the caps, and checked near legs to caps for continuity.
Will recheck everything and add some pictures of the board in case someone else can see something.
One thing...