• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Recent content by radiorich

  1. R

    The "POS Mac" / Daystar PowerCache SE/30 Restoration and Re-Build Thread

    Hello Joshc, your computer is really nice ! My Se/30 is not very dirty inside I am lucky I need to order the capacitors for the powersupply and analog board  and I am going to buy a new rework solder station too 
  2. R

    Trouble removing solder from through hole component

    Hello joshc , that looks like a great station that you bought 
  3. R

    SE/30: another battery leak victim (in the bag)

    Hello Marcelv, Thanks and when to this point I hope my hard drive is good Anyway David that's so great info. Marcelv  good luck with your machine and keep up the good work
  4. R

    SE/30: another battery leak victim (in the bag)

    Hello Marcelv, First all nice job on your repair  well I lucked  out on my Mac Se/30 the battery was still good no leakage and a very minor  corrosion as you can see in the photo . Anyway Marcely Did you use Tantalum capacitors to replace the SMD caps  my board has 8 sticks of ram 
  5. R

    SRAM for Portable "on sale" at DigiKey

    Hello guys, very cool 
  6. R

    Trouble removing solder from through hole component

    Hello joshc,, what soldering iron are you using myself I have Weller soldering station and it gets nice and hot anyway that's cool that you are also rebuilding a Se/30 too they are like the best machine far as the B/W CRT ones go 
  7. R

    Trouble removing solder from through hole component

    Hello guys, yes I also have used the needle idea and does work well I am going to order from mouser some chip quick just making a list for caps for my MAC SE/30 that am going to restore 
  8. R

    Macintosh SE/30 list of capacitors

    Hello everyone, I have a sick Se/30 that I need to replace The capacitors and was wondering if I should go with  Tantalums instead the SMD style I do see that list of capacitors anyway Trag I am putting mouser order in so I wanted to get these caps on order is there a list of the analog board...
  9. R

    Blast from the past,II/C stuff

    nice I have a Apple 2c in my collection 
  10. R

    SCSI2SD Mount for the SE/30

    Hello guys, joe did great job and I am just starting to restore my Mac SE/30 
Top