Seems to be a lot of folks wanting to re-use the Sunflower G4s, hooking up outside video, replacing the guts with an M1 Mac mini etc,
I thought I'd create a breakout board where you could pluck the video plug off the mother board, plug it into the breakout board and route the signals using lots...
Besides the DC power supply I have a spare of most every part in that printer (all work) so if you need stuff let me know and for the cost of freight I can send you a care package and you just send back what you don't need.
I know I have:
AC Power block
AC Fan
HV Power supply
I think I have a...
This is not my auction, but this is likely what you need:
https://www.ebay.com/itm/145272028763
Having refurbed a bunch of these, this component is bad 80% of the time.
Hello,
I just recently aquired this unit:
iMac G4/700 (Flat Panel)
700 MHz PowerPC 7441 (G4)
M6498 (EMC 1873)
Besides some pixel cancer it is on very good shape.
Several questions,
Safari is totally useless on this unit in 2024
I've tried downloading other browsers put the code on a USB...
In about a week I will have a spare Laserwriter IIg printer ready for sale.
I have refurbed the entire thing, works great, the only thing you'll need is a toner cart (not shipping those they just make a mess)
If you are in the continental US reach out.
Well the good news is that after an evening soak in WD40 for the roller shown below all is well and everything works great.
The roller and the rubber grommet are original to the unit, I know this because it has never been opened (screws still covered by product sticker.)
It arrived and it works.... sort of.
As you know there are three rollers inside, and X and a Y axis and then there is a third that sits at about 7 oclock.
It seems to not want to turn, it is inside two rubber grommets and Im wondering if its supposed to spin freely because it seems locke dup...