Recent content by grieverheart

I would like to connect my Quadra 840AV to a PC that has Munt running, emulating the Roland MT32. I was wondering if I can put together a cable that connects the Mac's serial port to USB. Would I need some kind of TTL adapter like this one? Has anyone tried doing this?

Visually, although difficult to see, one of the two lips inside the connector is not extended as much toward the center. Then, when I push the inserted headphone jack sideways towards one side, the internal speaker cuts off, while the connected headphones keep getting sound. The headphones...

I am in the process of restoring a Quadra 840AV and one of the problem it has is that the 3.5mm headphone connector is loose, which causes the connector's internal switch to not trigger, making both internal speaker and plugged in headphones be audible at the same time. I'm wondering if you...

@landoGriffin I recently got a Quadra 840AV, and although the PSU works fine, I want to be proactive in case it dies on me. Do you have any more pictures of how you assembled the PSU, and what ATX PSU do you recommend? Also, did you use the original fan or did you replace that too?

I finally received an stlink I had ordered and I updated the BlueSCSI with the latest firmware and that fixed the problem.

No, this is on MacOS 11.7.9 I cannot open them in Resedit. I get similar errors. Yes, latest version.

I recently built a BlueSCSI v1 kit for my Quadra 840AV, and spent a whole day filling a 25GB drive. I built the image using dd and formatting with Drive Setup on the Quadra and I installed everything using Basilisk II (I have to say it's quite buggy and crashed a few times). I tested many of the...