Thanks. I can verify that at least the VSS (GND) and a couple of other lines, like the 14 and 16 pins being tied together, are correct. I can only assume the rest are right. If I knew the pinout of the 50 pin connector on the 190 or 5300 then I could tell more but I have not found that either.
Would love a datasheet. I cannot find one anywhere. I think you are right. The connector cable on the bottom left is flakey and if bumped wrong will take out the bottom half. Might have to look around for a cheep one.
I have a PowerBook 5300 that I got for parts and ended up fixing it up and now it runs fine except for the LCD. I replaced the LCD with a black and white screen from a PowerBook 190 and everything worked but the original color screen was just a yellow bar in the middle of the LCD.
I started...
So I have a monitor that is supposed to work with the video card. I had to switch pins 1 and 2. I might ave to swap pins 5 and 6 but I don’t understand pin 6?
What I found out while looking at the connection to the monitor is that there are the connections:
1 - video signal A
2 - nothing
3 -...
I have the cable from the card to the back of the computer so I don’t need that.
What I do need is for someone to pin out the cable from the back of the computer to a two page display.
Does anyone have a service manual for the two page display or can they pin out the DB9 cable that comes with...
I know that this is an old thread but I thought I would help out people in the future.
I have been trying to get my Mobius-30 card display output going to HDMI for a while now.
First thing I want fix from above is the position of pin 1. I doctored the picture because I don't have one myself...