jefframsey
Well-known member
I finished recapping the comms board in my LW Pro 630 and now it is working once again! I still need to replace the caps on the DC controller board but at least it is working now that the communication board is resurrected. As soon as my next shipment from DigiKey comes in, I'll get the two caps on DC controller swapped out and she should be like a new printer.
I have connected the MiniDin-8 to my Apple IIgs, and the ethertalk to the network. I configured ethertalk to my Raspberry Pi running A2SERVER and then shared it via CUPS to all of the modern computers in the house. The computers that I have in this house that can all print to this printer without changing wires are as follows:
Apple IIgs (GS/OS 6.0.4)
Mac SE (7.0.1)
Mac Color Classic (7.0.1)
iMac 5,1 (10.7.5)
Macbook Pro (2011)
Macbook Pro (2008)
Macbook (2017)
As soon as I can get the Laserwriter drivers installed, I'll be adding my Powerbook 540c to the list.
I have connected the MiniDin-8 to my Apple IIgs, and the ethertalk to the network. I configured ethertalk to my Raspberry Pi running A2SERVER and then shared it via CUPS to all of the modern computers in the house. The computers that I have in this house that can all print to this printer without changing wires are as follows:
Apple IIgs (GS/OS 6.0.4)
Mac SE (7.0.1)
Mac Color Classic (7.0.1)
iMac 5,1 (10.7.5)
Macbook Pro (2011)
Macbook Pro (2008)
Macbook (2017)
As soon as I can get the Laserwriter drivers installed, I'll be adding my Powerbook 540c to the list.