-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
Macintosh Plus with internal SyMBiotic 20 MB hard disk
- Thread starter mactjaap
- Start date
You lucky guy!
My Hyperdrive doesn't work right now, I suspect a bad capacitor on the daughter board and the old MFM hard drives... That reminds me, I need to sort this thing out quick. It's been sitting in my living room for nearly a year.
My Hyperdrive doesn't work right now, I suspect a bad capacitor on the daughter board and the old MFM hard drives... That reminds me, I need to sort this thing out quick. It's been sitting in my living room for nearly a year.
I would love to see the inside of that thing!
Yeah me too!
Does it have a daughterboard or not, I wonder? Since it uses SCSI and not MFM (unlike the Hyperdrive), there are no extra circuitry required on this one, I think...
I know you can tap into the power supply to get +12V and +5V to power the drive itself.
Someone (it might actually be you mactjaap...I don't remember) linked a picture of a hacked Plus with an internal SCSI hard drive. The job looked woeful but seemed relatively simple...
Does it have a daughterboard or not, I wonder? Since it uses SCSI and not MFM (unlike the Hyperdrive), there are no extra circuitry required on this one, I think...
I know you can tap into the power supply to get +12V and +5V to power the drive itself.
Someone (it might actually be you mactjaap...I don't remember) linked a picture of a hacked Plus with an internal SCSI hard drive. The job looked woeful but seemed relatively simple...
Couldn't wait until the weekend, so I opend it up last night.
I found a very serious solution to fasten the hard disk. A real harnas. Also a big fan is included. Wiring is also done proffesional.
The hard disk has a sticker on it with the name Rodime. This was a Scotish hard disk maker:
https://en.wikipedia.org/wiki/Rodime
Hav a look at the pictures:
I found a very serious solution to fasten the hard disk. A real harnas. Also a big fan is included. Wiring is also done proffesional.
The hard disk has a sticker on it with the name Rodime. This was a Scotish hard disk maker:
https://en.wikipedia.org/wiki/Rodime
Hav a look at the pictures:
Last edited by a moderator:
Nice pics!!
So now I get it. There's a cable sticking out of the back (probably through the security slot) that connects the hard drive to the SCSI port.
I bought a Plus ED, which I'm sure you're familiar with, mactjaap, since it's from the Nederlands ;D . I plan on adding an internal SCSI drive to it.
It doesn't work right now, but I'll fix this guy sooner or later. Need to order some caps now.
Could you please take a picture of where the molex connector wires originate from on the analog board? I think I have a pretty good idea of where to get +12 and +5, but since I'm not an EE at all, I don't want to risk hurting my Mac too much
So now I get it. There's a cable sticking out of the back (probably through the security slot) that connects the hard drive to the SCSI port.
I bought a Plus ED, which I'm sure you're familiar with, mactjaap, since it's from the Nederlands ;D . I plan on adding an internal SCSI drive to it.
It doesn't work right now, but I'll fix this guy sooner or later. Need to order some caps now.
Could you please take a picture of where the molex connector wires originate from on the analog board? I think I have a pretty good idea of where to get +12 and +5, but since I'm not an EE at all, I don't want to risk hurting my Mac too much
@BadGoldEagle
Here is the best picture I could make for connector wires. I hope you can use it. I'm afraid I have to dismantle the harnas to get better ones.
How nice your bought a ED from the Netherlands. I helped a fellow forum member to export one to. Here you can find them quite often. ( I have one too
)
Here is the best picture I could make for connector wires. I hope you can use it. I'm afraid I have to dismantle the harnas to get better ones.
How nice your bought a ED from the Netherlands. I helped a fellow forum member to export one to. Here you can find them quite often. ( I have one too
)
A video to show the machine at work...and its LED!
A link for mobiles, etc.
https://youtu.be/71YJi4iu-B8
A link for mobiles, etc.
https://youtu.be/71YJi4iu-B8
Similar threads
