Macintosh Classic bad wobbling picture

[Splatterbot]

Hi there,

I am from germany and i try to fix my macintosh classic.

The classic have a problem with the picture.

When i turn the mac on there is no sound and the crt shows a bad wobbling picture.

I have already recapped the logicboard and cleaned it up as good as possible by using a special board cleaner.

This had no change to this problem.

Is anybody out there who knows this problem?

Thanks!

(Sorry for my bad english)

 

[sadmanonatrain]

Hello,

The wobbly raster suggests that the Classic's voltages could be low. You will need a multimeter.

Information on checking this can be found below.

http://www.ccadams.org/se/classicmac2.pdf

 

[techknight]

its been discussed in several threads, you must recap the analog board as well. 

 

[Splatterbot]

Hi sadmanonatrain,

Thanks for your answer.

You are speaking about chapter 5.1 with the volatges on the external floppy connector, right?

Thanks!

 

[Splatterbot]

Hi techknight,

Thanks for your answer.

That would be my next step.

I already ordered new capacitors for the analogboard.

When they arrive i will do the job as soon as possible.

Thank you!

 

[sadmanonatrain]

Hi sadmanonatrain,

Thanks for your answer.

You are speaking about chapter 5.1 with the volatges on the external floppy connector, right?

Thanks!

After you have recapped the AB use this chapter to make sure that all of the voltages are in spec.

 

[westcoastech]

your english is better than our german