Quadra 950 Various Crashes

[jmacz]

Still running strong so far...

 

[jmacz]

Still doing ok. Hopefully stays that way.

 

[jmacz]

Argh.. image corrupted again. I've about exhausted the easy debugging... only thing easy left to try is a non emulated SCSI (ie. real disk).

If that doesn't help, I'd have to start attempting repros while watching various signals, and not sure I have time or the patience for that.

Actually, should probably try changing out the voltage regulators...

 

[Joopmac]

i guess when i use a bluescsi v2 on the high/fast speed setting in a 950, i have to use the berg power. otherwise it's unstable

 

[jmacz]

i guess when i use a bluescsi v2 on the high/fast speed setting in a 950, i have to use the berg power. otherwise it's unstable

Yeah, my ZuluSCSIs always are powered via the floppy/berg connector. Didn't help me

I got a working spinning disk from @techstep so when I get a chance, will test with a real drive to see if my issues are caused by the scsi emulation device.

 

[Froggy814]

Have you tapped right off of main power from the power supply? like the 5v rail going into the motherboard? Or used a external power supply? Have you already tried? Not meaning to say retrace, just double check.