Unknown Radius board

[amedeo_68k]

Hi guys, I have found this board in my garage.
Do you have any idea of what is ?

while writing this post I found it could be "Radius Two-Page Display Card SE/30 (TPD SE/30) For use with the Radius Two-Page Display CRT."
I guess the video signal is output from the coaxial, may be there is the possibility to make grayscale the internal display ?

Thank you
Amedeo

 

[AttilaSVK]

Hi!
A bit late answer, you might have figured it out by now. It's a Radius Two-Page Display card for the SE/30 indeed. AFAIK, it's black and white only and it's intended to be used with a high resolution external monitor. The coax connector goes to a BNC socket at the SE/30's rear expansion slot.

 

[amedeo_68k]

is there a way to use it with some generic display ?

 

[Phipli]

is there a way to use it with some generic display ?

Radius TPD/SE up and running . . . on an LCD no less!

Still need to get it set up for black on white, hopefully that's only a question of tying RGB inputs together at the VGA end of things, but my LCD success should give hope to others with SE cards dedicated to proprietary displays. After the Adjust in Progress screen dropped away, some patience...

68kmla.org