Jump to content

Caps - Tantalum or Electrolytes


Recommended Posts

  • 68kMLA Supporter

I'm planning on recapping my Newtons and thought I'd start with my 2100.

 

Looking at the logic board, there are a good number of yellow tantalums.  There is only one can SMD.

 

What I'm not sure is if the black square caps are tantalums or electrolytics.  They kind of look like tantalums, but they also kind of look like the plastic encased electrolytics (and even have the same logo) as were in my Duo 230 LCD screen (see thread below).  There isn't much material on the net as far as I can see regarding recapping the 2000/2100 Newtons.  As an aside, I am planning on replacing the supercap on the board.  Any thoughts as to what these are?

849927840_NewtonPCB.thumb.jpg.3ac78b101fce7640796251edd10369d2.jpg

)

Edited by superjer2000
Link to post
Share on other sites
  • 68kMLA Supporter
8 hours ago, Byrd said:

For the yellow SMT/SMD tantalums I'd replace with same, the black tantalums due to their placement I'd replace with dipped tantalums with legs, similar to what this person has done with the LCD caps in his PowerBook 100:

 

https://goughlui.com/2016/09/24/repair-apple-macintosh-powerbook-100-gotta-re-cap-em-all/

Thanks - but I'm not planning on replacing the tantalum caps, I just wanted some opinions as to whether the black caps are tants or electrolytics as per the initial message, they look like the plastic encased electrolytics that are found in Powerbook screens.  If they are tantalum, I'm not going to replace.  I see they have the polarity bar marking towards the + so I'm thinking they are tants.

 

Link to post
Share on other sites
On 5/2/2020 at 2:20 PM, superjer2000 said:

Thanks - but I'm not planning on replacing the tantalum caps, I just wanted some opinions as to whether the black caps are tants or electrolytics as per the initial message, they look like the plastic encased electrolytics that are found in Powerbook screens.  If they are tantalum, I'm not going to replace.  I see they have the polarity bar marking towards the + so I'm thinking they are tants.

 

Someone did a good video on repairing their newton 100 (below), and the electrolytic look like tants.   

Also good instructions on how to dissemble https://www.pda-soft.de/2x00_disassemble.html

 


 

 

Link to post
Share on other sites
  • 68kMLA Supporter
1 hour ago, Mr SN said:

Sorry, pasted wrong video above, this is the repair video where the electrolytic look like tants. 

 

Thanks!  That was perfect. The plastic enclosed electrolytics he noted are exactly what was in my Powerbook duo screen. I don’t see any of those in my Newton 2100 - just the traditional tants he points to. 

 

I’ll replace the sole SMD cap I see and the backup supercapacitor and I should be in business. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...