Search the Community
Showing results for tags 'iigs'.
Hi everyone! After some time searching for one, I Irecently bought an Apple IIgs keyboard for my SE/30 (the seller lives just 2 km from here, what a coincidence!). It is quite yellowed but the keys are quite nice and not sticky. I plugged it to a SE/30 with a cord taken from a working AEK II but nothing happens. It appears to be totally dead. Either port doesn't seem to work. Am I missing something? Even the PCB doesn't appear to be too terrible. I really wouldn't want to resell it or buy another one - they are too hard to find and import to Italy.
I recently picked up an Apple IIgs. Everything is working except the mouse. I even tried using the ADB-USB Wombat (which allows you to connect USB mouse and keyboards to an older Apple computer). And the usb mouse did not work either. The ADB keyboard works fine. The USB keyboard works fine (when hooked up with the ADB-USB) I checked in the IIGS Control Panel (loading during startup of the Apple) and the Slot 4 is set to Mouse (was told it needed to be that way). The motherboard is super clean, and the battery is not exploded, its actually working and has todays date on it
So in between working on our A/UX imaging project, trying to work through some Q950 issues and (on the side) my new SGI O2... I have a IIgs that I got in trade about six months ago that’s pretty much sat the whole time. It’s a ROM 01 unit. MicroDrive CF card w/ 512 MB CF ByteBoosters 4 MB RAM expansion card serial card I clipped the PRAM battery and got the alligator clip battery pack to replace it I bought an upgraded PSU from ReActiveMicro and that got installed last week I bought the Spanish HD15-to-SCART cable, a SCART-to-HDMI upscaler and
Greetings, My brother picked up an Apple IIgs for me from the thrift store yesterday. I am getting an error: system bad: 02010400 when I run the self test by holding command+option during boot. From what I can determine, this is a ram error. I removed the add-in ram card for now and re-ran the test with the same result. Does this error show ram chip bank 01 is bad? If so, would this be the chip "UM1" on the mainboard? And last, are these the correct replacement chips: http://www.jameco.com/z/41464-10-Major-Brands-64KX4-100NS-HY53C464S-10-DIP-18-DRAM_41574.html Thanks!