Search the Community
Showing results for tags '1.44MB'.
Until now, I've been using 400K, 800K and HD20 Mode dsk images with my FloppyEMU without problem. Today, I tried to use a 1440K image without success. I extracted it from the Blanks here. When I boot off my SCSI HDD into System 7.1 on my SE/30, it can't read the 1440K disk and asks me to Initialize. True, I have my Turbo040 installed and the ROM-inator II (with patched ROM that allows booting with the Turbo040), but I just wanted to put out this message to see if any of you have issues when trying to mount 1440K dsk images on an SE/30 via FloppyEMU. Thanks.
Hey all! This is my first post here on the forum. The rules document link is dead, so I'll do the best I can! I acquired an SE/30 back in April, and I've been gradually working on repairs since then. I managed to clean the logic board and replace all the caps, and I've replaced the PSU with a repaired one of the same model from eBay. I also managed to get the 800k external floppy drive working, and I can boot into the Utilities disk I have. Unfortunately, my 1.44 MB internal floppy drive isn't giving me as much luck. I thoroughly cleaned both floppy drives with denatured alcohol (i