LukeIntosh

thank you! there is one slight worry i have and that is connecting the ribbon cable (ill use fresh 40 pin stuff from ebay) i don't want to risk frying the LCD or the GPU by connecting things incorrectly that's my only real worry. as for the thread ill take a look! Thanks again for the help

Hello! since i cannot locate a replacement LCD ribbon cable for my powerbook i am going to solder a floppy cable style ribbon cable to the pins on the LCD panel and on the Video board on the powerbook (i have no idea if it has a scientific name or not if people could help out that would be great!), i may connect the board side end to a connector so that removing the LCD assembly isnt too much of a chore. the one issue i have with the Project is that apple never provided pinouts on internal connectors for the 68k books. but if anyone can help provide that would be super!

sorry for the absence again that sounds great but sadly im unable to figure out how shipping works (i have autism and haven't shipped parts yet)

that sounds Great! however im not quite ready yet if you could keep it asside for me that would be ace

damn.... well ill have to keep a look out for one do you have an EMI shield thingy though?

its OK if the brass mounts are still in there i can gorilla epoxy them in place also im considering building my own LCD cable too

Thanks i thew out the original battery and hdd but im sure i can find another somewhere

sweet thanks a bunch hopefully all that needs dealing with now is the battery and Hard Drive

hey guys i have a powerbook that was badly damaged by a sibling and the upper screen has become damaged, The bezel and LCD itself are fine but im going to need a new EMI shield and back Cover, i may also need a LCD ribbon cable but i can solder a permanent cable in its place if i cannot find one.