-
Hello Guest! We're hosting a challenge to welcome vintage Intel macs to the MLA during the month of July! See this thread for more information. -
We've made some quality of life improvements to the Trading Post. More info here.
Latest activity
-
AAEChadwick replied to the thread Rhapsody DR2 FAT Project.you are totally correct--i did pull one apart and it's the standard-cells-in-array setup. I've even seen reports that zeroing the power...
-
Kkataetheweirdo replied to the thread DingusPPC: A more accurate PowerPC Mac emulator.Bringing this back to the original topic, I've been running MacTest Pro on a Power Mac G3 Beige emulation. Some of the tests are still...
-
AAEChadwick replied to the thread Rhapsody DR2 FAT Project.the 560E is at the top of Rhapsody specs, but other people called it sluggish (link is OpenStep but relevant)--and they're right, out of...
-
AArbee replied to the thread DingusPPC: A more accurate PowerPC Mac emulator.Apple's pseudo-DMA is PIO, given the processor is doing the actual transfers, it's just that the I/O ASIC (or PAL on the SE and Classic)...
-
croissantking replied to the thread Q840av gets a make over.Guess you'll have drag a IIvx out and try. Mind your fingers on the metal lol -
Phipli replied to the thread Q840av gets a make over.Makes sense, like the 8100 it doesn't have a desktop version of the PCB. The weird one is the IIvx/vi. There is only the desktop... -
croissantking replied to the thread Q840av gets a make over.Just pulled out my spare board to look. I can't see any traces leading off from the middle pins of J29. It's possible the traces are...
-
Phipli replied to the thread Q840av gets a make over.@croissantking - they likely made the LEDs as a standard part, so it is whether the logic board has those pins wired to anything that is...
-
Phipli replied to the thread Q840av gets a make over.On the logic board? I.e. are the middle pins on the male connector wired to anything?
-
-
Phipli replied to the thread Q840av gets a make over.The 8100 was wired without the ID loop back, the 840av might be the same. Where there isn't a desktop and tower version I guess the ROM...
-
croissantking replied to the thread Q840av gets a make over.Have checked this yesterday while I had my case open and the jumper makes no difference, it IDs as an 840AV (ID 78) either way. Curious.
-
Snial replied to the thread BlueSCSI does not boot Mac SE.Summary: I bought a BlueSCSI kit; I've detailed my construction tests here and where I'm stuck due to an error message, advice welcome... -
Iiigs123 replied to the thread TashTalk USB.The Imagewriter works just fine direct to the G3 with the iPrint off.
-
croissantking replied to the thread PowerMac G4 MDD unstable after bus speed mod.Yeah, I’m starting to accept that maybe my board just isn’t capable of stable 166MHz operation. What’s good, is that once R676 is...
