Latest activity
-
gsteemso replied to the thread Rhapsody DR2 FAT Project.I mean, yes, there is documentation, but not the kind you would have had access to as a developer with access to the project internals. -
gsteemso replied to the thread Rhapsody DR2 FAT Project.Realistically, “from scratch” back then would have been a lot easier – here, you are having to do detective work on defective material...
-
jasonfortheworld replied to the thread Flashing ROM-inator Resurrections With EPROM.I actually wasn't able to find the ROM files that also have System 3.2 so use on the 128K anywhere. I ended up reaching out to Kero's... -
Anyone who knows me would know that I staunchly believe in the abolition of capital punishment. However, I feel that a reasonable... -
Ffrontein1 replied to the thread Flashing ROM-inator Resurrections With EPROM.I have a few of these for the Mac Plus. The ICs are probably similar though. Mine are SST 39SF040. You will need to take the BMOW...
-
@Snial - the Performa in a PC case requires the blood sacrifice! -
imactheknife replied to the thread 8100 psu.When i recapped it i noticed a resistor that had looked warm at the solder joints. I reflowed the solder but inadvertently broke the... -
BBurgertrench replied to the thread Has anyone used AppleCAT for SE/30 diagnostics?.This looks super handy, I wish there was a version that would work with other macs. I've been trying to fix an LCIII using the debug...
-
Ttyler5310 replied to the thread 6500/250 Woes.Done that too :(
-
Mmikes-macs replied to the thread 6500/250 Woes.try resetting the CUDA chip: locate the little red or white push-button switch on If your 6500 appears dead when pressing the power...
-
Ttyler5310 replied to the thread 6500/250 Woes.Ordered! I will give it a shot. I had my thoughts about this as well.
-
Fizzbinn replied to the thread 6500/250 Woes.Maybe try DeoxIT contact cleaner on RAM slots? I had success with that reviving a B&W G3 that couldn't boot in manner similar to what... -
Ttyler5310 replied to the thread 6500/250 Woes.I also reflowed all the pins of the edge connector, just to be safe. No change. I think it is, because when I hold the key combo, the...
