Latest activity
-
imactheknife replied to the thread Took a chance, now what.True.. will have to keep my eyes open for something like that -
demik replied to the thread Reverse Engineering the MacSnap SCSI.Answering this and your message in the other thread. You are right about power delivery, it can induce issues (see my post above in... -
Eemuboy replied to the thread LC III, happy boing, no video output.Well, WTF. I just soldered that jumper and it started to work, what are the chances? thank you very much Doug, you have been...
-
AAfterDark3 replied to the thread Mac OS 8.6 for (some) Unsupported G3s and G4s.I was about to post that my 600MHZ Late 01 iBook G3 attempts to run the installer but it stalls out on the checkerboard boot screen...
-
MacUp72 replied to the thread Rehabbing a tortured pismo.I‘d disassemble the pismo and inspect the board for any physical damage -
FBeen doing a lot of tinkering with my MacPlus machines lately. They both have 4MB of RAM. The long memory test time was bothering my...
-
dankcomputing replied to the thread Internal BlueSCSI and Wallstreet.Somehow one of those cheap little FC1307 adapters and a 128GB SD card are at least behaving better. I'm getting almost the same... -
torus_aei replied to the thread Rehabbing a tortured pismo.Thanks for all the input! After closer inspection, I think you guys are on to something here. It's looking less like it's shorting out... -
gsteemso replied to the thread Repairing graphics cards.Eh, I'll just try each type I have on a solder-filled through-hole (there are several) until I get one that mixes properly, then I'll... -
finkmac replied to the thread IIfx Memory.correct. I can't remember the exact part number I used, but that should be the right value. -
Hello there ! I've been using Macs since 1999. Always looking for the latest and greatest tech but just got interested in reliving... -
BBobDaAggie replied to the thread BlueSCSI does not boot Mac SE.Okay, thanks for the may suggestions. I have attempted all of them. In my latest log I have found this line: [14312ms] DBG ---- STATUS...
-
Juror22 replied to the thread Repairing graphics cards.Make sure you are using plenty of good quality flux (I despise ROHS solder, so any advice I give would be biased, and I like a good...
-
CCC_333 replied to the thread Rehabbing a tortured pismo.Agreed. Another symptom of a faulty DC board connection is a lack of sound (both the internal speaker header and headphone out/line/mic...
