Latest activity
-
croissantking replied to the thread Dead processor?.I see a group of about 7 or 8 pins that are slightly bent, can you very carefully straighten these? Looking again, there are a few... -
-
BBig Ben replied to the thread Reinstalling ANS from Zulu/BlueSCSI.Have you check the iso checksum? Just to be sure there was no corruption
-
Jjoevt replied to the thread Reinstalling ANS from Zulu/BlueSCSI.I've never booted aix before. Dumps of the ROM's Open Firmware assembly and Forth/fcode is at...
-
I'm trying to figure out how to reinstall my new (problematic-a topic for another thread) ANS500.... It boots fine off the drive that... -
-
bibilit replied to the thread Mac SE 800k 20SC bad startup screen no boot.Still trying to get it working. -
-
bibilit replied to the thread Macintosh Classic No Audio.Probably a broken trace, use a multimeter and check continuity from the chip and to any capacitor
-
ObeyDaleks replied to the thread Dead processor?.Multimeter won’t help. I would inspect carefully to make sure you don’t have damaged or bent pins. I see one in the picture that... -
Ccarian replied to the thread Dead processor?.From a local Whatsapp group. The seller didn't know its condition. Never thought it would be defective. I don't have a second devive...
-
FFred1212 replied to the thread G4 cube dead.And its dead again For no apparent reason won't boot again. I've not read anything about caps being a problem on cubes but is it a...
-
FFred1212 replied to the thread G4 cube dead.Some success did another PRAM reset and got to the flashing folder screen. Looks like the CDROM and HD are cactus so next I'll try a...
-
croissantking replied to the thread Powerbook 190 ram upgrade sad chime.Most likely a faulty RAM card (one or more chips dead). You might try blowing some contact cleaner in the connectors just to rule out a...
-
FFred1212 replied to the thread G4 cube dead.Yes tried that as well
-
IVcf SoCal was a blast and I got a Macintosh plus, cms 20mb hard drive, and peripherals. All the exhibits were very interesting and they...
-
-
Byrd replied to the thread Dead processor?.Rare to die, where did you get the CPU from - known working/tested or from an overseas chip supply company?
