Troubleshooting ZuluSCSI

[applesos]

Hi all,

I've been attempting to get a ZuluSCSI rev 2024.a running on my Mac SE. The config has quirks enabled, HD1.hda is running a freshly installed copy of System 7.5.3 (I have also tried 6.0.8), and I've had no luck at all. No log is generated, I can't seem to get it to install new firmware, and the Mac boots to the Question Mark Floppy error screen which would indicate no boot disk has been located.

It runs fine off my Floppy EMU.

Is there anything I'm missing here? SD card was formatted FAT32 with MBR via Disk Utility on Windows before provisioning. Unfortunately there don't really seem to be any Mac specific videos online and the docs themselves concern features for earlier revisions (I have no DIP switches I can flip on rev 2024).

Any help would be greatly appreciated.

 

[applesos]

My config is attached here, converted to .txt for convenience.

 

[applesos]

This thread can be considered closed. Immediately upon getting everything working flawlessly the Mac fell off my workbench and died.

 

[cheesestraws]

Oh no :-(

 

[Snial]

This thread can be considered closed. Immediately upon getting everything working flawlessly the Mac fell off my workbench and died.

Yike! How awful! :-( .

 

[applesos]

Yike! How awful! :-( .

It's no fun at all! My IIGS works like a champ though so I'll manage.

 

[jmacz]

Omg….

 

[nathall]

good grief