Anyone have any ideas why I can't get my FloppyEMU to work with a Powerbook Duo 2300C? It's been recapped, and I get the same exact message on 2 different Powerbook Duo 2300c's. One has been recapped, one has NOT been recapped. I used the information from this thread:
68kmla.org
And used the connector and cord from a broken Powerbook external floppy to make an adapter.
Something of note is that the message will constantly pop up every 5-10 seconds even if the FloppyEMU is idle and no disk is selected on the FloppyEMU. Selecting a disk does nothing. The FloppyEMU just sits at reading track 0
HDI-20 to IDC-20 adapter for use with Floppy Emu
Hi all, I cannibalised an HDI-20 floppy drive and created an adapter for my Floppy Emu using an IDC-20 breakout board. Here's a photo: I'm having the weirdest problem though: it can only mount the 800kb and 400kb disk images, not the 1.44mb images. The HD20 hard drive image mounts fine, but...
68kmla.org
And used the connector and cord from a broken Powerbook external floppy to make an adapter.
Something of note is that the message will constantly pop up every 5-10 seconds even if the FloppyEMU is idle and no disk is selected on the FloppyEMU. Selecting a disk does nothing. The FloppyEMU just sits at reading track 0
