-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
Picture: Mac Se,My Video Board is bad...
- Thread starter uniserver
- Start date
Have you tried checking all the connections with a volt ohm meter?
Since you have a working specimen, if they are identical, try comparing them. Make sure none of the diodes have reverse bias, the resistors match ohms (this depends on their tolerance range), and the capacitors are within range.
It is not that complicated of a board, so use a paper clip affixed solid to a test probe on one end to check all the pins on the power connection, the electron gun pins, all the traces, and all the components.
Since you have a working specimen, if they are identical, try comparing them. Make sure none of the diodes have reverse bias, the resistors match ohms (this depends on their tolerance range), and the capacitors are within range.
It is not that complicated of a board, so use a paper clip affixed solid to a test probe on one end to check all the pins on the power connection, the electron gun pins, all the traces, and all the components.
your video output transistor circuit is bad for sure.
check the output transistor for shorts, and nearby resistors for opens.
check the output transistor for shorts, and nearby resistors for opens.
