I bought a Mac SE on Ebay, but when it arrived the box looked very bad it has no video.
The display makes a crackling sound specifically the little tube behind the deflection yoke (That tube is also sparking inside), but the machine still gets the boot tone and starts accessing the hard drive.
I had noticed the small board connected to the back of the CRT appeared to be party not pressed down onto the pins.
- I pressed it back into place gently and tried it again.
- The screen still has no video, but makes the hairs raise on your arm now so I know it's getting charged.
- It is also now rebooting continuously due to the boot chime playing repeatedly every few seconds.
I really want to make this thing work. I wanted one since I was a kid.
Do I need to replace the CRT? I have a working crt from a mac plus.
Can anyone tell me what may be wrong here?
Thanks!,
Thomas
The display makes a crackling sound specifically the little tube behind the deflection yoke (That tube is also sparking inside), but the machine still gets the boot tone and starts accessing the hard drive.
I had noticed the small board connected to the back of the CRT appeared to be party not pressed down onto the pins.
- I pressed it back into place gently and tried it again.
- The screen still has no video, but makes the hairs raise on your arm now so I know it's getting charged.
- It is also now rebooting continuously due to the boot chime playing repeatedly every few seconds.
I really want to make this thing work. I wanted one since I was a kid.
Do I need to replace the CRT? I have a working crt from a mac plus.
Can anyone tell me what may be wrong here?
Thanks!,
Thomas
Last edited by a moderator:


