-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
iMac G5 1058 power switch on logic board
- Thread starter bengi3
- Start date
FOLLOW UP
This iMac had two power problems:
1) the power button on the back plate gone
2) the power switch on the logic board de soldered.
I isolated the power button with insulated tape, re-soldered the switch and then soldered two wires from the brass pods (see pictures) and routed outside the case through the vented grille.
Now I can power the iMac by shorting the two wires.
This is a temporary solution because this iMac has also some random and rare video artifacts that are sign if a dying GPU.
Nice experiment though.
This iMac had two power problems:
1) the power button on the back plate gone
2) the power switch on the logic board de soldered.
I isolated the power button with insulated tape, re-soldered the switch and then soldered two wires from the brass pods (see pictures) and routed outside the case through the vented grille.
Now I can power the iMac by shorting the two wires.
This is a temporary solution because this iMac has also some random and rare video artifacts that are sign if a dying GPU.
Nice experiment though.
