esprofile fried my lisa board

[d3jsp]

Recently ordered an esprofile internal from juicycrumb and plugged into my lisa from the widget data port. Since my lisa didn't come with a widget power port I powered the board using a micro USB cable on the ESP32. It didn't work.
Initially the lights turned on on the esprofile board but went out and the voltage regulator AMS1117-3 became extremely hot to the touch.

Now my lisa won't even boot with floppyemu and doesn't even attempt to read. Does anyone know which IO chip could be fried?

 

[d3jsp]

Now it just goes to the insert floppy error and doesn't even attempt to read anything. Occasionally it will return error 23 or error 25 if I reset floppy emu

 

[pl212]

Let's see, if I recall correctly that (internal) connector might not be keyed. Is it possible it was plugged in the wrong way?

 

[d3jsp]

Yeah, I think that might be what happened. Would the damage be to the LS157, LS245 and 344-0041a

 

[d3jsp]

What should be the correct orientation? I aligned pin 1 (the red line) on the right, with mark J1 on the board and the ESP board just caught fire and completely fried the Lisa IO board.

 

[wottle]

I believe you can use the keyed cables used for the external boards as a reference.