Search results

I've got a v5 board in mine and it has been flawless. My solution is not as elegant as yours though... it is double sided foam taped to the stock 3.5" carrier.

Possibly. Regardless, it is still very sad if that is the case. I am active in communities for a lot of my other hobbies - boating, automotive, railroad, etc - and by far, the vintage Mac community is the most helpful and friendly I have encountered.

Care to elaborate on this? If someone sells a product for money, they need to back it up with support...

Oh awesome! I’ve just about thrown in the towel on the one I have. Soft power is just no bueno on it.    Are you still considering letting it go to a good home?

Ooh! I see the trace there at C50, did the wire pull from the left? I'm just learning this stuff myself - I have only had one attempt at a recapping with an LC I have downstairs that is flaky at best. Discovering the solder paste may be a gamechanger! What part of MD are you in?

I recently discovered solder paste as well thanks to someone here. I have a bit of a standing tremor and not the best coordination, and solder paste and my hot air rework station have been my savior with getting my Color Classic going again. 

Unfortunately no dice. I've done this twice now. I am also getting odd feedback through the speaker when it is accessing the "hard drive" (I have a scsi2sd in this machine), so I have baked or cooked something else. I'm going to take up Fizzbinn's offer and purchase a good known board and put...

Thanks! I’ll take a look at that tonight as well now that I have a bit of newfound confidence in this stuff.    I wish Apple had published a technical guide to the Macintosh that covers the CC like they did with the earlier machines!

So the solder paste came today. That stuff is insane - I felt like a pro. I got the chip soldered back on - and the machine now boots (which it did not after my ill fated attempt at soldering before). That’s the good news.    The bad news is that soft power is still not working. I’m gonna...

So tonight after a lot of YouTubing, I decided to put my new soldering iron (smaller tip and temp control) to the test and cleaned up the board with some flux and copper wick. My solder paste arrives tomorrow and I want to give that a go.    Does this look like a good place to start? My...

... I have never heard of this sorcery until this (paste... I have seen drag soldering).    I watched some YouTube videos and just ordered the paste. I have a rework station already... I am excited now! I have a few other things (LC power supplies, an incoming Centris 610) that need recapping...

Hot air rather than an actual soldering iron? Interesting... seems like it would be easier for me if that is the case (since I shake a bit).

Hmm, that may be part of it - my solder seemed to be too large of a gauge and I had a hard time not getting it across pads - so I was trying to reflow what is there. Whenever I would attempt to remount the chip it never seemed to sit right on the pads. I don't have the best dexterity and seemed...

That’s fine, of course! I’m actually going to be out of town next week/weekend unexpectedly so it’s gonna be a bit for me as well. 

Definitely let me know - and consider it sold if you'd like. I'll even drive down to get it to save the hassle and potential damage of shipping - I drag the boat down to Lake Anna all the time, so heading to Charlottesville is a piece of cake. Thank you. This is why I love this hobby!

Well, I don't think it is the EGRET sadly. I desoldered it and cleaned under/around it and put it back on. I am not the best with a soldering iron or hot air rework station, so it took a few hours. Now, it won't boot at all - so I either burned a trace or cooked the EGRET. I practiced for an...

Awesome on all fronts. I thought the CC needed a battery to be able to use soft power? thank you for letting me know the location of the Egret... I am going to get my hot air rework station out tomorrow and see if I can get it off and cleaned up. The machine ran like a top all day today after a...

Holy Crap. 3 hours in and its already nearing stock whiteness...

Yea, I tore it down the other night. The whole thing smelled like an ashtray and needed a good scrubbing.

Well, let's see how this goes. Started with a keyboard and mouse. Built a "cell" of such to help with the brightening.