Search results

Does she boot MacWorks or MacWorks+? MacWorks+ normally formats the whole disk as HFS drive and there is no Lisa partition.

That's not a ZIP drive, it's a JAZ drive. JAZ drives are removable hard disk drives. You can't use a JAZ cartridge in a ZIP drive. To use with that PB adapter, you will need a SCSI 2 to SCSI 1 (with DB25 on the SCSI 1 side) cable.

Hey Stepleton, Is your website down? I was playing with my Cameo/Aphid and I can't seem to be able to access the link to the prebuild images: cameo/aphid image Using the wayback machine I did finally locate a google drive link to the file.

Not really a "special", the X/Profile is a current product and fully supported, the parts are normally stocked, and X/Profiles are built to order. I am not the seller, but If you PM me I will help you get a quote for price and lead time. X/Profile is an amazing device, I have four of them!

You have an electrical short somewhere in your Lisa. Try pulling out the IO card and see if she powers up then. If she does, then it's an issue with the I/O board. If it's not the I/O board, then try unplugging everything you can ( disk drives, RAM cards, expansion cards, etc. ) till she comes up.

My guess is that the OP is referring to this: https://www.macip.net/macippi/ This image was developed specifically for the OrangePi Zero One, I am guessing the issue that the OP is trying this on the OrangePi Zero 3, and that is the issue. I have this setup running on a OrangePi Zero One and...

It's important you use Diskcopy 4.2 and not version 6.x.x. Diskcopy 4.2 preserves the Lisa tag bytes, later versions don't. One other way to make Lisa disks is to use the Lisa herself using BLU. Lisa BLU You can load BLU on bare metal over the serial port, then make a BLU diskette. From...

Hi Steve, I am not sure there ever was a "PAL" version of the Apple 2gs, they were all NTSC ( apples variation of NTSC at least ). I do have two apple 2gs systems and an apple 2gs RGB monitor for testing, if there is some way I can help, just PM me. Rick

Wow! That's way cool. Better than my GatorStar GX-R for sure.

Just checked my Dayna board in my SE/30 and is uses a 26pin IDC cable to the transceiver board, not 16pin IDC cable. :(

I would be very interested in testing this card. I currently have a Dana card in my SE/30 with a AUI/BNC board. Using the 10BaseT transceiver is a pain. Rick

Have you tried that card in an apple 2 to make sure it's functional? What slot do you have the mouse card in? My A2 mouse card has the same P/N. Here is a quick and dirty video of it working:

You will need the sos driver for the mouse, I think it is on one of these this disks: https://apple3.org/Software/productivity/DrawOnThree.dsk https://apple3.org/Software/productivity/DrawOnThree2.dsk https://apple3.org/Software/wap/images/APPLE-3-WAP-msc-04b.dsk

Yes it does.

Are you using the CFFA3000 driver for the A3 or the CFFA driver. The older CFFA driver will not work with the CFFA300 card.

Thats not true. The 2/10 motherboard & I/O boards have been recreated. I helped to recreate them, and have complete card cages populated with newly made motherboard, I/O, CPU, and memory boards. All the components used are new or NOS. Rick

Cro-Mag Rally and BugDom on firewire iMacs Early iMac's shipped with MDK on CD.

Hey Huxley, The adapter you have is not meant to allow you to boot an A3 from the external port. I understand your confusion, this thread had started with a post from Zezba9000 who had adapted the FloppyEmu IIc converter to boot the A3 from the FloppyEmu, but morphed into a discussion about the...

robin-fo is absolutely correct! Just formatted an HFS+ floppy using my M1 mini and a external USB drive. Also modern MacOS also supports PC floppies just fine.

Your imagining this... there never was a USB drive that supported 800K Mac format disks. The original iMac did have the signals to connect a SuperDrive to the main logic board if you added the connector and used early firmware. This was undocumented and unsupported of course.