Search results

Used Black Night and logged in to both BBSes . Looks great in color. It's like going back in time...

Thanks for the info @finkmac , @DW1992 -- I'll set things up and give it a try!

How can I connect to your BBS? Have not logged on to a BBS in years...

Thanks -- It looks like I can trash it.

I have a database extension in my system folder, called DAL-- what software uses this extension? it looks like it was part of system 7.0.1, I am running 7.1.1 now, not sure if I need the DAL extension.

That's good to know about the SE/30 stock ROM... This particular SE/30 is the only one that had a stock ROM-- I usually install A GG Labs IIsi ROM, just to get 32 bit clean code. The GW 4402B ROM has some cool features, so I figured I'd try it in this machine.

I have an SE/30 with an Interware Booster SE/30 clone installed. Always had the silly bongs on startup.. until I installed a GW4402B ROM Simm from Garrett's Workshop. Norton System Info still shows the 68030 @ 47Mhz, and the accelerator is working, just no more silly bongs. Just wondering why...

I used the Seasonic SSP-250SUB And mounted it in the Astec case. https://68kmla.org/bb/index.php?threads/se-30-turning-on-very-slowly.47126/#post-529123 Pics and a drawing at the link above

Where did you get the extension cable for the logic board? I could use one of those.

Awesome! I think the clue was when you forced the output of UE8 to the UG6 PAL. I was thinking UE8 might be bad when that happened. Another one saved.

Take a look at pin 2, close to the pad. There's a line across the trace. Not sure what that is. Could be solder mask...

I'll say. Can you post a pic when it's cleaned up?

Connecting pin UE8 pin 12 to pin 13 is shorting the Vid(6) input to the Qh output-- forcing a signal to the PAL UG6. I'd double check every connection on UE8.

Depends on what the video looks like, UE8 usually is a vertical jailbar pattern on the screen. (Every Nth dot missing). can you get a pic of the video?

check around C7 and UF8 for trace damage or shorts? I think C7 is pretty close to a trace going to UF8

UG6, UE6, UE7 -- should be in sockets. video ROM too. Shouldn't be that bad-- try removing from the bad board first so you get a feel for it.

Did you try the video chips/ROM from a good board in this one?

To I used those too, no issues with them

C5 + connects to UB11, pin 15 and UB10 pin 15