Search results

Ah wonderful. Putting Apple MIDI Driver and MIDI Manager in the root folder did the trick. Hoyle Classic started up right away and sent sound to my MT-32pi. Too bad it is pretty slow on a LCIII. I also tried Thexder (v1.0.1 from Macintosh Repository) and it started but then died with an...

Ok, that helped. I cut my cable and mirrored the pins now OMS 2.3.1 can see my MT-32pi and I can play a mid in Musicshop. So how can I get Hoyle Classic to use this? It says it needs Midi Manager and the extension is enabled, I just don't know how to configure it. The game starts then says...

I bought an Opcode MIDI translator (not the II) with no cable. Which 8 pin DIN cable do I need? Would the 590-0340 cable work?

I originally had C22 as silk screened and as the previous cap was mounted. However, while troubleshooting, I noticed that the -5v rail was around -2.91v. I found this thread which states it should be reversed...

A delay before the startup chime. With 1x16MB module in there, it took just over 4 minutes to chime after the switch was thrown. I can try it without the module as well but I am pretty sure it started up within seconds before I recapped it.

So a little update. I was reading on other forums that some people have an issue with the Mac taking several minutes to start up. I powered on my LC III with no hard drive, just the floppy connected and boot disk inserted. After a while, I came back to it and it booted successfully. Do the...

Let me know if this helps.

Hi there, I also have a LC III that was working but had leaky caps. I bought a tantalum kit from console5 and recapped. As far as I can tell everything looks good. Except now I have a system that powers on but no chime or video. No sound through the headphone jack either. I saw -2.8v on the...