• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Search results

  1. V

    Color Classic / SCSI2SD v5.5 not terminated

    I didn't do a deep cleaning, just superficial cleaning with isopropyl wipes. The startup chime is loud and clear. Yes, the factory drive is still fine, bootable, and reports ID 0. Yep I tried with the internal drive disconnected, and the scsi2sd connected to the external port. I still get the...
  2. V

    Color Classic / SCSI2SD v5.5 not terminated

    I recapped it, some of the solder joints are a little suspect but I think everything's ok. I didn't see any obvious damaged traces on the board, do you have any ideas for areas to take a closer look at? I attached a pic of the logic board. I haven't tried with the internal drive unplugged yet.
  3. V

    Color Classic / SCSI2SD v5.5 not terminated

    My v5.5 plugs into the external port. When I run scsiprobe with it attached, I see no devices listed (photo attached) I've tried configuring it to appear as both one physical drive and multiple physical drives, but there's no change in behavior. I'll try unplugging the internal hard drive...
  4. V

    Color Classic / SCSI2SD v5.5 not terminated

    I recently got a SCSI2SD v5.5 to use with a Color Classic I recapped and have been getting running again. For some reason, my CC is unable to boot from either the SCSI2SD or the internal hard drive when the SCSI2SD is attached, I get a floppy disk icon with flashing question mark. I then put...
Back
Top