Search results

This is so amazing! 8D When will these be available? Ive been dying to get grayscale in my se30 to complete it!

Just a little friendly safety reminder that the pots on the analog board should be adjusted with a PLASTIC screwdriver/tool Only , especially the variable resistor DO NOT USE A METAL SCREWDRIVER! You could get a serious shock! Unless you want to end up on the next episode of electroboom! ;P...

sadly I missed out on the other amazing cards you made but i really hope I can get one of these! =)

it wasn't very exciting lol I tried to clean up the burn mark its pretty deep! but the rest of the case cleaned up like a mirror I can really see the signatures now, I guess I added a signature of my own in the mold now lol ! I managed to file off most of the charred corner of the radius...

I suppose you're right, I never noticed and never heard anything mentioned about the inside of the case being completely coated with metal I guess as an emi shield, I tested the resistance of the case is like 002 ohms so ya its pretty conductive, it just looked like some pretty high current that...

I thought I could finally put the case back on my se30 I thought I finally had it fixed and completed, I had recently replaced the old cracked and arcing flyback transformer and got all 128mb of ram. Even with the case on the external screen never went grayscale I thought replacing the...

I will also order the other set of 64mb (16mbx4) ram sticks to finally max this se30 out to 128mb of ram soon! =)

I spent the money and got a NOS replacement flyback transformer to replace my good ol sparky stock one, model 157-0042C was replaced with a 157-0026C. After some extensive testing no sparks or arcs I could see and no smell of smoke or anything so I put the case back on and so far there has been...

Just thought I would finally update this post after all these years! Finally made some more progress on my good ol se30. I came across a asante maccon ethernet se30 model with the removable AUI daughter-board to fit a monitor port and decided to modify the radius pivot card for the iisi with a...

Just use the screw extractor bits is probably the best way I could think of

As far as I understood those radius boards there was no cable for that bus port but instead a secondary card that is supposed to go on that slot like these photos of a board I saw on ebay. I'm not sure of their compatibility tho. This is just a 2 page display board that also does not have the...

i Think this is the bin file I downloaded for my SE/30 maccon I think it also includes drivers for other versions as well.?maybe? I recommend reading the readme file it suggested disabling my extensions for installation by holding shift while booting and also after installing I had to shut the...

This same thing is happening to my flyback transformer and i would hate to waste money on another analog board with another old burnt out flyback that might even be worse off than the one i have! I would love to find or afford a NOS flyback or one day hopefully people will make a replacement...

I may have found some what of a clue to what the culprit might be to this odd problem. Or maybe not but this still needs to be addressed. While I had my se case off it was sitting in a place on my desk that was rather dark I noticed the tiniest arcing/spark on the flyback transformer, this...

I've got a very crazy weird issue that is intermittent and kind of hard to explain so I'll try to word it as best I can. I have never been able to figure this out in all these years. I have a good ol se30 that I recapped many years ago and fully recapped the analog and power supply the voltages...

I know this thread is a little old, but I had a similar problem with my radius pivot color card in my se30 with 68mb of ram 32bit clean using system 7 the mouse would freeze on startup only on the radius monitor. The issue was with the old ROM (I had v1.0) on the radius pivot card when using...

Man  I have really missed out this year This is the coolest thing I have seen in a long time! wondering if they are still available or how much they are? also what can each of those slots handle? And can that db port be removed to make room for a video port? like some models of the asante...

Sorry its been so long since I have been on this site and I didn't notice the recent posts, hope you all got it figured out ok since then >< JDW as far as the capacitor I used they were not an exact fit but  depending on the rev of analog board you have the leads on those film capacitors...

XCEED o.o

I got lucky with the diimo030 card on ebay very pricey.. I don't think it gets too hot at all i never checked, I do now have an optical/laser thermometer I can use to actually test it... one day when i have time to get it out and play with the se30 again. I don't think they had temperature...