Search results

Thanks! :)

I did try but nobody ever responded to my request. I might pop in every once in awhile. I just noticed this was the exact issue I'm currently having with my reloaded board.

Hi, did Will explain the root cause of the slow death chime and horizontal lines? Sorry if I missed that in the thread. I'm in the exact same situation with my reloaded board. Thanks for any info. sorry I see the explanation now. Disregard.

Right. The external port.

It's true. Apologies for asking again but I figured I'd get all my questions in one post and was still hoping there would be some way to test it with an oscilloscope, multimeter and the datasheet if it exists. I will accept defeat lol.

Thanks very much for your help!

Sorry, here are the pictures.

As I’m working on an SE/30 reloaded board, a few questions have arisen, If anyone would like to offer any knowledge or advice, I’d appreciate it. 1] U32 Crystal Oscillator (see pic) appears to be polarized based on the silkscreen on the board? As I was cleaning the parts, the writing on the top...

Full recap of the analog board is pretty easy and cheap compared to other restoration needs. No reason not to do that.

hmmm..seemed like a reasonable question. Just wondered if it was a certain range of years. Thanks for the info anyway.

By serial number or other? Is it true that these are the most prone to leaking? That has been my own experience.

Good advice. Thanks.

uh-oh........

ok that made me laugh. It would be the best possible way.

What would be the best way to test a glue chip from my sadly battery bombed SE/30 to see if: A) the corrosion which has been cleaned off was enough to destroy it. Looks OK visually.. B) I didn't kill it with my heat gun trying to remove it. Thanks for any help. All I have is a multimeter but...

Thanks! Found it on macintoshgarden.

Thanks, I would very much appreciate a photo of that.

gonna try to salvage whatever I can. It looks like the pins on the GLUE might be OK. maybe not. That one side looks pretty bad.

well I took a chance and lost on this one… Thought you should see this mess though.

When it boots up and loads the OS9.2.2 desktop it says "The software needed to use the USB device "Unknown Device" cannot be found. Please refer to the device documentation...." Not sure what that is referring to? Nothing is plugged in to any ports at all but it does recognize a USB flash drive...