Search results

thanks all i upgraded the ram to 768mb and put some heat paste on the spots this mac was %100 new it look like its only had about 1500 hours use of its 10 year life.. its now runing %100 very happly upgrade to tiger though

thanks for the info http://www.info.apple.com/support/aht.html has a video tester

i have a flat g4 mac with bad pic on desktop after its warmed up :( is it possible to re flow the ram/gfx chip?? heat and flux??? etc or fine an good m/broad?? ANY IDEA's?

and i thought 10mhz was to high :< Dot clock = 15.6672 MHz Dot = 63.83 ns Full line = 49.93 µs Line rate = 22.25 kHz Full frame = 16.626 ms Frame rate = 60.15 Hz if it was me i would use the analog video as 640x480 fine (but i would want to turn off the color carrier and just have...

got another c\classic swapped over the mother board up it came so its something on the pcb

the 575 PCB was missing the gnd on the audio }:) all fix :beige:

IF i put h/phones i have sound

ok so my 575 pcb come and i have fited it but no sound :( put the old cc pcb in i have sound 8-o .. i can see the sound go up and down and the top menu flash when the vol is at max.. the mute is off etc is there no a -12v mod to do????

ok lets start again. I found a color classic on new zealands ebay trademe.co.nz it would not boot.. so when it came i looked inside bad caps. replace the caps and booted it up and :?: !! downloaded a boot disk and up it came ( ok hdd bad?? ) put the hdd in my classic II to see whats...

Analog Board Connector 1 -12 V input 2 GND 3 4 5 ADB Power supply 6 GND 7 Power off command 8 GND 9 Composite signal output 10 GND 11 Video signal output(Blue) 12 GND 13 Video signal output(Green) 14 GND 16 15 Video signal output(Red) 17 Brightness control output 18 GND 19...

the hard disk is fine the main pcb wont boot or see hdd's so the scis chip is not doing is job have leaky cap done it in??? need to know what chip dose the io control...

i'v replace the scsi chip and still no better if i boot the computer with "Network Access Disk 7.5.sea" theres still no hdd on the desktop xx( i also try my lc si mac hdd os7.5.x still no hdd the scsi bus is not there [:(] ]'>

this sound very cool am guessing 648x480 @ 67hz was it full screen??

nope 1 faulty cc main pcb WELL I TRIED :disapprove:

i just changed my scis chip and will test it tonite..will it work 8-o

rrr my hard drive wont boot if i remove the hdd and put it in my classic II (b/w) it boots fine.... dose the scsi chip give probs?? or the connectors??? :scrambled:

thanks for the info i was going to 640x480 dose any one have a backup of http://www.stuartbell.dsl.pipex.com/PowerCC thanks

long live Robby the Robot! arrr my hard drive wont boot :scrambled: if i remove the hdd and put it in my classic II (b/w) it boots fine.... the 575 is not here yet.. so i'm trying to fix the old one first.. dose the scsi chip give probs?? or the connectors??? hey tomlee what os are u...

ok so i got my my apple colour classic today and leaky caps :disapprove: here a list of caps for any one who needs it c4,c5,c6,c9,c10,c11 47uf 16v c2,c3 100uf 6.3v c8 10uf 16v Ps i'v just got a 575 heheh a good friend is going to pick it up here in New Zealand no one is after old mac...

i'v just got a Apple Colour Classic and found http://www.kevinomura.com/macs/colorclassic/index.html what main pcb fits in a color classic.. :simasimac: