Search results

Hi all, This is probably a bit of a long-shot, but I was figuring out how to use Beagle Bros.' Frame-Up, and the manual (https://archive.org/details/Beagle_Bros-Frame-Up/page/n15/mode/2up) mentions a keyboard guide that lists the shortcuts available. Unfortunately the shortcuts themselves...

Hi all, I have an iBook G3 Clamshell Tangerine that I just took apart and put back together with an SE (366MHz) logic board and an SSD. When I put it all back together, I get the boot chime just fine, but instead of seeing a Happy Mac (or, the ? Folder, since the drive is empty), I just see the...

Hi all, I've never had an Apple II before and I've become somewhat curious about getting one. I think the IIc+ looks like the ideal machine for what I'd want - it's tiny, has everything built in that I'd really need, and the lack of a 5.25" drive doesn't really matter since I don't have any...

This is a continuation of an old thread: https://tinkerdifferent.com/threads/macintosh-se-wont-boot-system-7.792/ tl;dr - Booting System 7 off of my BlueSCSI didn't work. I got a RaSCSI instead, and that worked. Since then I put the BlueSCSI away and didn't think about it too much. I've...

I just installed a 512MB RAM stick from OWC into my clamshell iBook. However, in Apple System Profiler, it's only showing the stick as 64MB (plus the 64MB built-in to the logic board, so 128MB total). I'm running Mac OS 9.2.2. Normally I'd assume that I got a mislabeled part, but since I assume...

I recently got a USB Zip drive that came along with a bunch of other stuff, so I thought getting a SCSI one would be a good way to moving files between my SE/30 and modern machines. Unfortunately, it looks like SCSI Zip drives are relatively rare (at least to find working models). What's been...

I've installed Tiger onto my 12" 867MHz PowerBook G4 using the Garden image, and it seemed to install correctly. However, when I try to boot from that drive, it tries to boot for a little bit, until I'm greeted with a disappointing grey 🚫/"not" sign. I tried verbose boot, and got an error...

I put 8.1 on my SE/30, which runs fairly well! However, I haven't been able to install the drivers for my RaSCSI's Daynaport emulation. It says the folder "Network" cannot be modified by the installer, and the Garden page for the drivers only mentions it being compatible with System 6/7. I'm...

Hey all, I've been using a RaSCSI with my SE/30, which worked great until I bought a cheap SCSI cable on Amazon and tried to use it. I apparently upset the SCSI gods and goddesses and now my main boot image won't load. When I try to mount it from another boot disk, it tells me the disk is...

I bought an SE/30 logic board to upgrade my SE, thinking it would fit, and it... *almost* does! But, the PSU connector is just a little bit further down on the SE/30 board, and whatever revision of the SE I have has a chassis does not seem to like it. You can see in these pictures that the PSU...

Hi all, I'm trying to set up ethernet on my Mac SE using my RaSCSI and the instructions here: https://github.com/akuker/RASCSI/wiki/Dayna-Port-SCSI-Link However, I'm having trouble getting the DaynaPort Drivers to work. When I try to unpack the linked .sit file, Stuffit quits immediately...

Hi all, I posted this thread over on TinkerDifferent, and I was hoping to post here to get some more eyes on it. tl;dr - As far as I can tell there was a bad stick of RAM which is now replaced, which helped a lot. However, I'm still having lots of errors with more advanced workflows and I'm...