Search results

Any idea what might cause this after recapping both the LCD and the logic board?

I could never seem to get my Classic to boot with the MicroMac Performer sitting over the original processor - so I finally recapped the accelerator and cleaned the socket clip and if finally boots. Oddly enough the Tash20 device that works normally w the classic no longer boots w the...

I have a previously working molar mac that is outputting a dim screen w w purple or violet hue. Any idea what this might be? I'm going through all my machines to make sure they are working and this one surprised me. I don't recall if I swapped the personality card - but I remember odd things...

Hi - I recently got my m5126 logic board recapped and the person that did it was able to get it working but w the sound chip seemingly not working. I got the board back and now none of it will power on. Does anyone know if the LCD cable has an orientation when it plugs into the board? I had to...

Does anyone have a BlueSCSI image confirmed to work and "run" the backlight from the system folder? I'm trying to verify if my 5126 - which used to have a well functioning backlight before the HD died - is working properly. It has been fully recapped and serviced. The system folder needs a...

Hi I have a common Asante MacCon Ethernet card that came in an SE/30 originally stacked on top of a Diimo. The Diimo is missing two caps but when I plug the card into the PDS slot (the logic board was just recapped by me) - the entire machine just clips, clicks and won't power on anything...

Hi I have a couple of 030 Mac Plus accelerators and both hAve a way to grab extra power via red and black clips that I recall clip on to a resistor on the power sweep board. Does anyone know which resistor you can do this with? I just can't find a manual around this task.

Anyone have any details on this accelerator in this IIFX? I bought it in Japan and the snap on card looks like it says "Tech Noir" but the current HD appears to be missing a driver. The chip looks like an 040 - but I can't tell from the blurry photos. Apparently this company ran the Nexus...

Hi I have a strange issue with a Color Classic w a Takky mods. Basically it boots when I have it tipped forward but when it's set upright normally it's almost like the screen shorts out after a few seconds. The LED and the screen power up and then immediately shut off. It seems to be related to...

Hey all - im using the wonderful new atx power supply adapter kit for my SE/30 and I switched to an adjustable voltage power supply and accidentally overloaded my se/30 and now the entire analog board won't power up. I changed the fuses on the adapter kit and switched PSUs so I know the problem...

Can anyone help with some details around the jumper settings on these two cards? One is a Bolle and one is an original unbranded card. There appear to be multiple places on each to specify Diimo or Daystar for the CS - and the original appears to have a whole chip to switch at C1? I'm somewhat...

Has anyone created an image for the SE/30 w a Rominator in it that has the patching that enables it to work with System 8.1 and 7.5.3? Ive comfortable recapping and creating images but I can just tell im going to screw this up somehow. Anyway, if anyone has those one or both images that work...