Search results

well I "fixed" it.... by taking the quantum and putting it in the junk bin. Now has a blueSCSI - everything ok.

that makes sense. I'll install complete system 7.1 and see if anything changes. Thanks.

yeah there are definitely 800K image files for 7.1 and 7.0 installs. I have them. I thought I remembered something called the "network disk" but no sign of that. Maybe that was a 1.44.

Yes, I should probably just get a multi device SCSI cable to transfer these files (and I will if I have to) BUT...... I'm networking my SE(800k) currently running 6.0.8 to My SE/30 running 7.1...(appleshare via printer port). That's fine. Except all the disk errors I'm getting when...

I did manage to fix it ..luckily kept a spare analog board around. So I switched out the whole L2 inductor. Curious how difficult it would be to make one of these?

any progress on this? Having the same issue on one of my boards.

it's had a full recap by the way. I replaced C15 no difference... R19 looks like it might have something to do with it?

I have several of these boards that work fine so I know how to adjust this control. One of the width controls (L2) has no effect no matter what. Checked and reflowed all the solder joints. is this perhaps connected to a resistor that might be shot? thanks for any help.

One question. If all I want is 256 colors at 640 x 480, is it worth it to upgrade the Toby? Will there be significantly better performance at that setting?

interesting. Yeah that's what I figured. Thanks for the info!

Well it's not perfect but I recapped it (29 caps), reflowed the larger solder joints, put deoxit on all the connectors/sockets and cleaned it up. That's about all you can do as far as I know, besides rejuvinating it but I'm not going that far.

well I fixed my M1212 to the point where it's reasonably focused, the convergence and geometry are pretty good.... hence, kind of done with CRT's but not completely done.

I agree in a perfect world, I'd prefer a nice low hour Trinitron. Thanks, I'll check out the bmow shop.

The Trinitron tube on my M1212 is worn out and won't focus well. Plus even though I wear gloves and understand the precautions, I feel at risk anytime I'm working on this thing. This is not a cause I'm willing to die for. Has anyone transplanted a nice LCD into an apple monitor or is that a...

Whenever I widen the horizontal adjust, the top and bottom corners move out but the middle of the left and right side stays where it is... like this: ) ( Is there an adjustment to counterbalance this and get them even?

CV17 was actually a 100uf 25v on my monitor. Also confirmed on the schematic.

Let's try that again.....

These were the Cap values for my M1212. CV17 was a 10uf 100v Loc(μF)(V) CF1022035 CF1147025 CF24.750 CF710025 CF8220016 CF922025 CL11150 CL132.2200 CL1447100 CL1910200 CL21100100 CL231006.3 CL24150 CL31150 CL410025 CP10150 CP11150400 CP12100100...

Thanks! Exactly what I was looking for. So it needs to go 4x4mb in Bank A and 4x1mb in Bank B.

I have a IIcx with 4 x 1mb SIMMs in Bank A Can I add 4 x 4mb SIMMS in Bank B for a total of 20mb (Mode32 installed) ? I read somewhere about the larger memory needing to be in Bank A but maybe that was just the original Mac II ? Thanks.