Search results

I've never seen a Magic Keyboard 1 with a return key like that

SE/30s are picky about their RAM, so try swapping out the RAM first

you're welcome

https://www.macintoshrepository.org/44146-mr-browser

that is a Y cap, you should only replace X caps with X or X2 and Y with only Y or Y2

and mac84.net, he has a link to a lot of different sites for old macs on his retro site

bbs.fozztexx.net on port 23 and cqbbs.ddns.net on port 6800, use Black Night for the best experience. Also, use MR Browser to get stuff on the SE/30

it should in theory

as far as I know, yes

yup, all in the 630 series have the same connector as the 5xxx and 6xxx series

I wonder if this would work in a G3 with a G4 accelerator

I believe the -5V is used for audio and video, the 12V is only for the floppy drives

Get back to us with the result, as this can also happen with bad RAM or when the voltage from the analog board is out of spec

I think that Launcher only first appeared in a version of 7.5

https://www.macintoshrepository.org/2254-at-ease https://www.macintoshrepository.org/44146-mr-browser

just drill the rivets and replace them either with new rivets or screws when you put it back together

shouldn't be, just make sure it's a good quality wirewrap wire, like kynar or something

the rominator ii by @bigmessowires is also 32-bit clean, as it was designed originally with the iici and iisi in mind, but will fit and work in a iix, iicx, and SE/30

it probably would, but I'd recommend instead using a iisi rom or a rominator ii

that sounds like something is broken with the system. Try booting from a System Tools disk and see if the behavior persists in the System Tools disk. If it doesn't persist, try running Disk First Aid on the volume you normally use to boot