Search results

W6 is just a jumper. I belive you talking about the width coil. As long as the ferrite core isn't broken it should be okay. Make sure if your adjusting it you only use a plastic adjustment tool. If you use a metal Alan wrench it will mess with the inductance of the coil and will make the Alan...

Sorry... that's meant to say your your yoke connector doesn't have any fractured joints.

You don't have vertical deflection. Remeber... the tube is essentially on it's left side so the line you see from top to bottom is actually horizontal deflection. I would check the pads aren't fractured from the traces you'd been. That and make sure yournypke connector doesn't have any...

Verify your yoke us good. Check the resistance of the vertical and horizontal yoke of your old monitor and compare it to your new monitor. You want to make sure they're close to the same to verify there isn't a problem with your new yoke (broken wire, short, etc). If they're good odds are good...

FINALLY! Intermittent issues are the worst. It would work for 5, and then simasimac for... however long it wanted to A little electrolytic damage, but cleaned it all and pulled and cleaned all the ic's in the affected areas. What fixed it? Not sure... it was either reflowing the all the...

Blown Away! Ya'lls reverse engineering from those schematics amazes me. Congrats!!!

It seems like they have convertors out there that do it, but having never used one i can't vouch for they're useabity.

I'm not familiar with the Hami convertor, but I'm assuming you''ve tried this process on other composite input monitors and it has worked. If that's the case what are you getting on the iic monitor? It might be that you just need to adjust thr horizontal sync or one of the other adjustments.

I have 2764's too. I have pretty much any eprom you need bud (2516/2716 up). Byproduct of being a game tech for over 25 yrs. Let me know what size / speed you need and I'll send you a couple. I can program them for you too if you send me the bin.

Heya Obsolete. I have LOTS of 27C512's (256's too, but did I mention I have a lot of 512's?). Send me a message if you need a couple and I'll send them your way gratis.

Yeah... I love the fusion of Apple 2 and an IBM case style. It was definetly the wild west of computing back then.

I just recently aquired a case that is exactly the same as that, but all the hardware in it is original Apple 2 (both power supply and the pcb). I wonder what the back story is on that case. I've seen a number of clones, but none with the extended keyboard like that. Since mine seems to have...

Congrats! Glad you found it!!!

Thumbs up for console5. I've bought a number of kits from him. If your doing a one shot cap kit that's the way to go. Mouser wanted more for the main filter cap then what he sold his whole Sony p/s kit for (I did have to drill the pcb to get his to fit though... =) ). Mouser, however, is great...

Grasping here, but another thing you can check... Make sure you haven't fractured any pads from their traces. Verify continuity from your solder pads to the trace going to them (either scratch off a little mask, or trace back to the next pad/part). Ive seen micro fractures that isolate the...

First up. Was it all good before you capped it? If so then as bibilit said I would check for for any caps that weren't put in correctly and solder bridges. There is only one non polarized cap in that kit (the polyprop at c15). The only other thing I would suggest is to make sure you haven't...

Your welcome! Anytime.

Got you bud... Power is 10.2mm length 2.8mm height (except p which is 3.7mm total length) Disk use is 12.4mm wide 2.8mm height(d and k are 3.7mm) Keyboard is 14.5 length 2.8mm height (k, y, b, and are 3.7) 80 / 40 is 11mm length and 3.9 height on the 80 and the 40 with the \ dipping below the...