Search results

Following :)

Very nice. One thing I love about this is the RJ45 sticks out level with the slot so that the cable is not IMPOSSIBLE to push the tab on and remove, unlike my RJ45 MacCon :)

I don't think an FPU will help with that game, unfortunately.

Technically a GeForce 4 is faster :) But good luck finding one.

You should replace the caps, no question, but also: check continuity across the power switch. Those fail in LC II PSUs. I was able to get mine to power on (after re-capping) by bypassing the switch!

No page with modern security (including apple.com) will load on ancient browsers. theoldnet.com and frogfind.com will be your friends with ancient browsers

That's an ethernet card, with a socket for a FPU. The 10baseT is nice because it will plug into a semi-modern HUB. Drivers are here: https://vintageapple.org/macdrivers/network.shtml $90 is pretty high, especially if you can't test it. You can still get new old stock ones made by other...

I have bought crossovers from this seller: https://www.ebay.com/itm/371981646916 The wiring is described in the listing, is how I knew it would work.

I have a bombed board, I can check and if the RAM is not affected I could send it to you.

RTL8139 should work with 8.1: http://macintoshgarden.org/apps/realtek-ethernet-pci-card-drivers-rtl8100blrtl8100clrtl8101lrtl8139cl-rtl8139clrtl8139dlrtl8100

CommSlot II ethernet, if the machine has PCI. They are fairly rare by this point.

Looks like you mean 550-667

I have a 667, but it's a Radeon 7500. There were two 667s :)

That would be a hardware issue :( Remove the modules, clean them, reseat them.

16 MB!? Those are rookie numbers! ::looks in memory drawer::

OS choice on that machine is really just a matter of taste. It’ll handle 7.5-8.6 just fine. I’d only put 9 on there if you need USB, FireWire, or OpenGL.

10.2 kernel panics for me, too, with an RHC hard card and the 512 k firmware. Also B&W rev A. I could try it in a G4 I suppose. Or try the generic SiI-3112s. 8.6 works fine.

Booting from FireWire would not, unfortunately, tell you whether the motherboard IDE works.

If it works in his Pismo, and not in yours, that means something is wrong with the motherboard :( I'd still try a different IDE device to be sure.

I know mSATA to IDE adapters do not work in my slightly-older-than-a-Pismo B&W G3. I would try a different SSD.