Search results

I have the opportunity to acquire one of these, but can find very little info on it. I believe it's a daisy wheel printer, but it has a keyboard with it. The owner claims to have used it with his Mac Plus back when both were new. Anyone have experience with these?

I have my home and office networks integrated with Tailscale. Each sees the other as a subnet, facilitated by having a linux machine acting as a subnet router at each location. I'm trying to figure out what would be required to bridge EtherTalk between the two networks. I would also like to...

I would like to be able to mirror the built-in video from my SE/30 to a projector with HDMI input in my classroom. I have tried to make sense of the various adapters at Joe's Computer Museum and other similar stores, but I can't quite figure out what I need. It seems like I need some version...

Does anyone know what the DIP settings are/mean on the Etherprint-T? Or better yet, have a manual? On the PCB, the switches are labeled RANGE and PHASE. Thanks.

I bought a non-working M0131. I have a couple good superdrives. Is it a simple swap? I have seen some discussion about pin 9 changing voltages between Mac models. I'd be using it with a SE/30 or IIci.

There are many of these brackets for the SE/30, but I couldn't find one with a DB15 and MicroSD slot. Here's mine in case it's useful: https://www.printables.com/model/1673529-macintosh-se30-db15-microsd-bracket Both the connector and SD slot are recessed within the case to protect them.

I made a 3D-printed brace to support my video card, stacked on top of a Diimo 030. I didn’t like the way it was flopping around. It’s very rigid. Secured with four 1/2” 4-40 nylon machine screws and nuts. I can post the files somewhere if anyone’s interested.

I recently bought one of these from a member here, and it works great. I thing I remember from back in the day that some video cards could sense when a monitor was connected. Anyone know if this one can somehow? If I boot the machine with nothing connected, and the menu bar is on the external...

I have acquired a Diimo 030 for the SE/30. When I insert it and turn on the machine, there is no chime and the screen is filled with mostly vertical lines. Pull it out and it boots fine. I bought it from Japan (I'm in the US) and the dealer said he tested it. Obviously it's going to be a...

I'm using a BlueSCSI v2 in my SE/30 (internal with access through the rear). I am connected to WiFi. What is the best way to get files OFF of the SE/30 and onto my modern Mac? FTP? Something else? The BlueSCSI Transfer utility is great for going the other way, but I have a ton of files on...