Search results

Sorted thanks all

Hi again if you are about max I am trying to fix pin 2 connection on LP2(ZL2) and there is no trace left on board and the hole into the board has no sign of any copper or solder. Do you know where it should connect to? thanks

That fixed it C8 was the problem but I am going to also sort out C13c as well Many thanks max

Fantastic observation max I did not see C8 I'll change it out. Thanks very much

Pics

Yes I'll take a couple

I've given the board a really good clean and visual inspection and cannot see anything untoward. Latest test it chimes lights up monitor and mouse pointer then reboots before splash screen

I have a recapped LCIII that has been working well. It has just started to reboot itself just after it has booted into the desktop and a couple of times has locked and rebooted during startup. I've done all the usual swaps of known good memory drive and power supply from another working LCIII...

Nice work

Thanks I'll have another go at it

I have a recapped LCIII that has been working well. It has just started to reboot itself just after it has booted into the desktop and a couple of times has locked and rebooted during startup. I've done all the usual swaps of known good memory drive and power supply from another working LCIII...

As I suspected

Late response but had same problem with my SE replacement of ADB also fixed it.

Have you tried different memory chips?

I've had no success with getting this to work. Tried a variety of settings. I'm using an ethernet network connection and appletalk and just get error no first class server on network 1044

On early Macs ROM chips could cause vertical stripe problem, clean and reseat ROMs!. I'd also be suspicious of the onboard RAM chip.

"Could not switch to ethertalk due to an error. Your connection will be reset to Localtalk" this is the message I get. Have three options, ethernet 1 & 2 and Alternative in Network Control Panel and all give same error

Hi Has anyone got one of these working. I am having trouble getting it ti work have tried with system 6 & 7 and tattltech shows the card info but when I try to select ethernet in network control panel gets error and reverts to local talk. Cheers

DP2 is the 600v diode I was referring too.

Thanks Cheesestraws