Search results

Well done

Nice

Nice work. Great to see it working.

Yes well done. I've just had success with one as well. Pulled apart cleaned and re greased all the moving parts, it loaded and ejected disk ok and read track zero and mounted on desktop but would not read or write, turned out the motor that drives the r/w head had died swapped from another and...

Thanks tried Bank B only still no go. Can't get it to display video at all now so whatever is causing it has gone from unreliable to dead

Looking at the schematic probably need to lift clean replace the UJ's

Have a recapped IIci that will chime and startup with video if it has RAM only in bank A. BUT occasionally it will boot OK with RAM in bank B as well. Mostly it will not start with Bank B filled and if it doesn't start and the RAM is removed from B I have to remove the supply and let it sit for...

Power supply fix or replacement, lots of options but replacing the guts with a small ATX supply is a relatively easy start. Once supply is done, don't worry about the soft start just leave the main switch on and plug in power to supply. Double check all your supply voltages and output connector...

Everyone is broke maybe!

Yep quiet lately

Have you tried diskcopy 6.3, drag and drop the files onto it? Just read you are running system 6.0.8 so can't use 6.3, maybe get a system 7 on your Zulu

You could try refurbishing the floppy and realigning the head

Have you changed the caps on the AB?

Any idea on pricing?

Recapped?

ROMs are good tested on another board

Hi all Has anyone seen the screen output I'm getting from 512k board? Get a strangled startup bong and some clicking from the speaker and the screen appears to go through the startup motions in garbled form and settles on the garbage shown. RAM maybe?

I have a 800k external and 6.08 on the disk. Unfortunately you need 7.5 or better to run the patched HD setup so I did this on a LC475

Hi everyone thanks for all the info. Firstly I followed the process and initialised the zip disk with patched hd setup 7.53 then reloaded the system folder back onto disk. Didn't boot first try so I booted the Plus from an external floppy that had the iomega driver on it and I could see the zip...

HI all. Have iomega zip driver 4.2 on zip with system 7.01. Have booted from a floppy and the zip appears on desktop OK but on restart from ZIP drive it starts to boot get splash with happy MAC for about 2 seconds and all looks good then crashes to black screen with error. Have tried on SE and...