I use rdmark Debian release from github. Has smb and appletalk server so you can access it from a new iMac which you can use to download software from the net and then copy to debian server which you can access from your older macs via appletak. Works great as you have a repository for all you...
I've swapped a number of crt's around between SE, SE/30, classics and you need to fiddle with the convergence rings and the small magnets to get them right. It's not hard and luckily I've never been bitten by the HV. Best to use just one hand to be sure of avoiding the HV. It does take a bit of...
Thanks for your reply. I've replaced UE8 and still get vertical jailbars and only clicks and pops from Speaker. Have ultrasonic cleaned and recapped. It's progress as started with black screen. Cheers
IPA will clean the board but as has been said you need a recap. You could try to do it yourself, not too difficult if you are a compatant solderer. Lots of resources on youtube to help you.
probably OK but a good ultrasonic clean is probably the best option. I'd be hunting for a replacement RTC, apparently they have been cloned recently. If you decide it's all too much ther would be no problem getting a buyer for the board as its a good SE/30 reloaded candidate
Definately cap goo corrosion UC7, UD8 and UE8. I'd lift those and clean under. Just done a similar looking board and they were causing black screen. It's still not quite right but getting there. Take the RTC out and see what it looks like
Hi everyone My SE/30 Chimes and boots(can see bluescsi flashing). Originally no screen but I've removed and cleaned UE8 LS166 and UF8 LS393 both had cap goo under and now I get what is shown in pics. What to check next?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.