Search results

The spring making went well, but the spring may be a little tight. The right side of the floppy disk sticks out of the drive just a tad bit more than the left side due to the spring, and this question may be pedantic but does the floppy disk have to be completely centered inside the drive?

Yep! That worked. Thanks!!

Per the subject, does anyone have any recommendations? Rubbing SuperLube grease on the exterior doesn't do much. Is there maybe a way to slide the pieces off and get to the metal rail? Unless SuperLube oil is an alternative, that may seep in there.

You think this is doable for someone who's never done it before? I fear I may be horrible inept.

Welp, my Powerbook 160 seems to be a prime example of Murphy's Law. Long story short, the flex cable for the top head of the drive has snapped. I just wanna check if there's possibly some magical way to remedy this before getting a whole new drive. Any thoughts? Thanks!

I had a similar thought a few days ago. Great timing. My Powerbook 160 also has a Sony MPF22A-01, with one 6A 47uf aluminum vchip (same the left board in your image).

I was cleaning a floppy drive when I seemingly bent a spring out of place. Could anyone measure the spring (its position is marked in red) so I can find a McMaster replacement? Thanks!

How could I do this? Anything within the confines of system 7.1? or would I have to take out the ROM and reprogram it or something.

Any updates to this? I have an SE/30 with 7.1 and 64mb of ram and... I'd looove to skip the startup check. EDIT: I realize this thread is in the Power Mac section. Maybe disregard this comment o_O

Sure! I’ll take it. I’ll dm you :)

Ah! I figured something like that was the case. You wouldn't happen to have any insight on a replacement pot would you...

Heh. Another question, how do I possibly remove the metal bit from the actual plastic itself?

?

Per the title, I have a 160 that I'm restoring. Is there a way to pull off the keycaps so as to clean under them? Just checking so I don't potentially break something. Thanks!

Nothing new here, my brightness pot has rusted away and the metal parts have disintegrated. There's a post from 2021 regarding this, but maybe something's changed in the last five years? Any help? Thanks!

Awesome! Thanks. If I wanted to get a Synchr030, could I leave out the ram slots entirely?

Heyo! As per usual, I got an SE/30, the battery has leaked and rusted everywhere. Any expert opinions on saving the board, getting a recreation board, reusing the chips, etc? Thanks!

Ok! I’ve fixed my Apple and this works! It seems though that this uses my Mac to control the Apple, and not the other way around (use the Apple to control the Mac). One of my ideas was to use the Apple to open a terminal software on the Mac through Brew (an image viewer called Chafa) and view it...

Thanks! The french version has what I need :)

Per the title, I’m looking for Part II of the manual: Guide to Apple //e, //plus, and //. Part 1 can be found easily online, but part 2 has stumped me.