Search results

You're right about that. I was counting on being able to use a generic card. I have a couple of generic ones that I made work with a Lombard, the problem is that they do not allow target or boot. Custom firmware would be required if it is designed completely.

Seeing that each of us would use it differently, perhaps the best option is a mezzanine to PCMCIA adapter, perhaps double PCMCIA as in the old powerbooks. This adapter would be easier to make: mezzanine connector to flat cable, and in the case, from flat cable to PCMCIA (adding necessary...

Hi, I'm starting a lot of posts these days, I hope I'm not bothering you. I was reading about the Mezzanine port on the iMac G3 tray loading, and I see it was a "normal" PCI port under a non-standard connector, the mezzanine. Is this true? If so, would someone with circuit design skills be...

Thank you so much for recovering the link!! Now I know how to do it. I'm going to write it down and save it so I don't lose it again. We've preserved other information!! When I have changed the HDD for SSD I will try it.

Thanks for your reply. Can you find me a photo of those two components that may fail? so I can identify them, I'm not used to working with screens. The symptom repeats itself every time I start it, I don't really know how to diagnose it. In my question about the wiring, I was wondering what...

nothing?

Well, I don't remember, I only keep this link that doesn't work and a note that I should move two "0ohm" resistors. bus overclock Good find, those three resistors on the motherboard, although they should not be in use, because for 66MHz there should be 2 resistors there. The schematic...

thanks for the information. Then I must add R140 to reach 83MHz. I can't locate R139. About 15 years ago I already did this FSB overclock and it was stable at 83MHz, with PC100 RAM.

Hello I have 233MHz OC at 300MHz

Hello, I am writing to you because the information on the Internet is getting lost. Many years ago I overclocked the FSB on one of these iMacs from 66MHz to 83MHz, but I don't have the documentation and I can't find anything on the Internet. Does anyone remember how to do it? Any photos and...

Hello everyone. I recently found a very cheap iMac G4 700MHz because it wasn't working. When I checked, I saw that it was the PSU. The optocouplers were failing. I changed them and the power supply has come back to life. Now it turns on and makes a "chime" sound but the screen always does the...

Exactly, the PLL is not there, it is a variant of the previous motherboard.

It seems that the Aliexpress seller is unable to activate shipping to Europe. I am insisting that he ask Aliexpress, but I am afraid that I will not be able to purchase the film. And now I would need two, because I have received a PB1400cs with the same problem.

Hi, I recently purchased an iBook G4 1.33GHz, 133MHz bus, if I'm not mistaken, it's an "early-2004". I wanted to try overclocking but my motherboard doesn't have the PLLs where this link indicates: overclock iBook G4 Does anyone have the location and configuration of the PLLs for my version...

-error-

Thank you very much, I'm going to try to buy it and see if I can get it, I'm not sure....

Thanks for your reply. I just saw that all FSTN sellers don't ship to Europe!!! I've contacted them to see if it's possible. I'm unlucky. It has to be exactly FSTN, right? Because he has several options, he also has TN, STN...

Ok, thanks, then I'm going to buy polarized, and I've seen that it costs less to remove. I found this one, what do you think? Polarized film

So I need TN film? I had found polarized. Thanks for the RAM suggestion, apart from the voltage, the pinout is completely different. I'm not going to try it. I haven't looked in the buy-sell section because I'm in Spain, just the shipping and taxes would make it too expensive.

As someone already mentioned, I think it might be worth trying this method first. In this video it's very difficult to remove the old film, in other videos it's easier to remove. I found a 30x20cm film for less than 5€. I'll probably get bubbles when I stick it on, who knows. Vynegar Syndrome...