Search results

  1. M

    Macintosh Plus Chirping Noise

    I believe I’ve found the problem The wire harness that goes between the analog board and the logic board is finicky, whenever it is moved it causes many different symptoms. Examples being: 1. A weird distorted checker board 2. A line going horizontally across the screen 3. A line going...
  2. M

    "(Error #-199)" Error Code

    I believe I’ve found the problem The wire harness that goes between the analog board and the logic board is finicky, whenever it is moved it causes a different symptom. Examples being: 1. A weird distorted checker board 2. A line going horizontally across the screen 3. A line going...
  3. M

    "(Error #-199)" Error Code

    Well, I removed, cleaned, and reseated the RAM. It worked for a while but the problem came back, I’ll check the floppy port...
  4. M

    "(Error #-199)" Error Code

    Ahhh, the RAM is a good point. its been upgraded anyway so I’ll check it. If it’s not the problem I’ll check the floppy port.
  5. M

    "(Error #-199)" Error Code

    Well, while I was using the Macintosh there were no problems, at first, but problems soon started to occur (repeatedly restarting) lt has always happened but usually stops. in layman’s terms, I don’t know exactly what caused it.
  6. M

    "(Error #-199)" Error Code

    I’ve checked the dead Mac scrolls and I can’t find anything about this problem, any other sources I could use?
  7. M

    "(Error #-199)" Error Code

    Yay... Just what I wanted.
  8. M

    "(Error #-199)" Error Code

    Noton Utilites? Alright, I'll give it a shot.
  9. M

    "(Error #-199)" Error Code

    It's A Macintosh Plus w/ 4MB of ram, I've made a partition that's exactly 2GB, I'll make it slightly smaller...
  10. M

    "(Error #-199)" Error Code

    Just to be clear, the hard drive info is: 2GB Quantum Grand Prix 50-Pin SCSI
  11. M

    "(Error #-199)" Error Code

     For some reason the drive copy’s some files, but not others. It seems to not copy system files but does copy non-system files.
  12. M

    System Saver And Hard Drive Enclosure

    Alright, I’ll give it a shot. I should probably also mention that I’ve found bad blocks on the drive. I have been using Lido to format the drive and has been working pretty good, however when I try to reassign the bad blocks it fails to do so. I keep getting other error messages as well. I’ll...
  13. M

    "(Error #-199)" Error Code

    Alright, I'll try that. Stand by...
  14. M

    "(Error #-199)" Error Code

    When I try to install 6.0.8 on my Quantum Grand Prix HD it gives me the error message: "There's a problem with the disk"Ehman HDD." Installation cannot continue. The disk "Ehman HDD" may not be a usable startup disk. (Error #-199)" I'm not sure what's wrong with it, suggestions?
  15. M

    Macintosh Plus System 6 Disks, SCSI Hard drive setup, and transferring software/programs.

    I posted this on another thread but I'm posting it here as well.  I've got another issue with my HD, This error message pops up when i try to install 6.0.8 via FloppyEmu:
  16. M

    System Saver And Hard Drive Enclosure

    Well, I'm back. I've got another issue with my HD, This error message pops up when i try to install 6.0.8:
  17. M

    System Saver And Hard Drive Enclosure

    [No message]
  18. M

    Requests for new software?

    Alright, are you working on something now?
  19. M

    Requests for new software?

    Isn't the 512Ke similar to the Plus?
  20. M

    BSR Phone-Modem

    Yep, pretty much everybody copied the Hayes Command set. I decided to pop it open and its pretty interesting inside (to me at least) Here:
Back
Top