Search results

Whoops, bit of a dufus moment there. I finally replaced all the caps but the bars still persist, at least the fan spins a bit faster. Tried swapping around different ram sticks, tried it without ram, and double checked the jumper settings. I tried the troubleshooting tip in the manual (pages...

Thanks, unfortunately I've already jerry-rigged another cap onto the board...

After a LONG time of procrastination, I've finally gotten around to ordering capacitors for my SE's power supply. While flipping around in a scan of the manual it says that ram at 100ns or faster is required for the 25MHz and I've only got 70ns. Should I get 100ns RAM?

What capacitor have you found to more or less substitute the 620uF 400v cap?

These old capacitor sizes are wack, man. Cap "A" in particular.

I've found a Mac Classic for $50.00, But it's got the 00000000F 00000000D sad mac code. Pick Up?

Nevermind, There's a button labeled "Int/Ext Sync" and it was on external. That was stupid. The beeper speaker still isn't working though. When I do the self test "Kernel OK" is the result. It used to be "System OK". If the Kernel is ok, does that mean other components are not?

You and Callan were right, The PVM's horizontal sync was off. I'm going to adjust. The other II is the first one with the broken capacitor.

and I have 2 //e's

I've always used this monitor, so it should be fine. The beeper speaker doesn't work as well.

Here's a video that might help:

So being lit means it passed or failed?

What does this LED indicate?

Alright, It displays nothing and has no "Beep". it occasionally displays this: As for the RAM, I'm a complete noob.

One of my apple II's is not working and I believe this is the cause: I tested the resistance of the other resistors under the other IC's and they're 5 Ohms. I'm not entirely sure how to find a direct replacement on Mouser so I'm asking for help. Thanks.

Turns out the wheel is just metal, I've looked at the apple cartridges for this and they seem to have a deeper cutout than my cartridges. I'm going to Dremel out some plastic and see if it solves anything...

Thanks!

A rubber wheel that's supposed to move the tape in the cartridge has no grip, its hard and smooth. The tape isn't moving so I guess the drive can't find the BOT...

The activity light is flashing and the computer is giving me this message:

Turns on now, I'm going to hook it up to my SE.