Search results

I've taken it apart, yes, the plates are moving. Here it is going through a self-test before the error. After the cut it the heads stay there till the drive is turned off and on again.

I went and replaced the cable with a normal floppy cable and plug adapter. No dice, unfortunately, still gave the same 2800000 error. The cable that connects the drive to the board looks 100% fine, so I doubt it's that. I also went and used contact cleaner on all of the plugs. Any clue on where...

I can hear it doing the self-test every time, but I'll check the cable. The rubber is separated from the connector shielding on the cable, so I assume maybe a wire snapped inside as well.

I may have an HD20 to slot one of these emulators in now. Coming up with a communication error involving hi->low busy signals. So, might be a good candidate for a swap.

I recently got an HD20 from a friend, along with a "CoolMac" and a Kensington Turbo Mouse. However, trying to test the HD20 resulted in it constantly trying to connect, failing to connect, asking to format, failing to format, then asking again to connect. The cable is somewhat frayed on the...

Oh, thank you! I'll have to get one of those kits.

I'm wondering if there are any other solutions besides the FloppyEmu for HD20 emulation. While the FloppyEmu is nice, I'd rather not buy another one just to condemn it to the inside of a SCSI case. Are there any cheaper/no screen solutions, like the BlueSCSI?